Electronics Forum | Tue Mar 07 21:57:54 EST 2017 | ttheis
It was indeed the fact that the height sensor needle was moved away from the dispense needle. Happened to find a height probe rod with longer reach in the spare parts shipped with the machine; with the height sense probe next to the needle the machin
Electronics Forum | Mon Sep 20 22:17:04 EDT 2021 | ttheis
SOLVED Upon manually activating the zaxis to drive the spindles down, it was noted that the touch down sensor for spindle #2 was activating at a certain point in the travel without touching anything. I went to look at the adjustment of the sensor
Electronics Forum | Mon Nov 09 11:56:59 EST 1998 | Stefan W.
At least I can imagine what happens and it may solve your problem. If the vacuum is already turned on above the component there will be an airstream above and around the component. This might even suck the air out of the cavity, which supports the co
Electronics Forum | Tue Nov 01 20:40:03 EDT 2011 | mikeincal
What may be happening is an early trigger of your vacuum sensors during production due to a clogged tip or vacuum line in the head. What happens during production is that the Y axis gets into position, and then the vacuum sensor input is monitored on
Electronics Forum | Wed Jan 18 12:57:22 EST 2006 | cyber_wolf
Since I have posted on this last, we have found that 99% of our nozzle sticking problems are do to part height problems. I have been told that CP6 machines are very sensitive to part height do to the amount of spring travel in the nozzle. If you hav
Electronics Forum | Sat Apr 25 02:46:18 EDT 2009 | smellew
FYI SME offers a replacement Tape leaf detection system which covers the whole range of FUJI CP4-CP7 machines.its also very reasonably priced. It doesn't use Fibre Sensors or mirrors. it only has 1 adjustment which is height via Eccentric screw. even
Electronics Forum | Tue Oct 31 13:15:13 EST 2006 | realchunks
SWAG is prolly right. You can verify the tactile sensor by watching the machine carefully. When finding the stencil height, make sure the board goes all the way up and touches the stencil to trigger the tactile. If it doesn't, then something is wr
Electronics Forum | Wed Jan 05 10:55:12 EST 2005 | OverTheHill
WOW Sr.Tech, 40K worth of bent tools? I'm about ready to be sh*t canned because of 1K's worth. As for trimming the mags, the product is running fine (many boards) and then out of nowhere the tool bends, so I assume my PERFECT operators trimmed the ma
Electronics Forum | Thu Mar 31 04:39:56 EST 2005 | zsolt
Hello All, we have 2 CP842 on site and they are running simply perfect. We used our existing CP feeders (with the small reel holder). CP843 can compensate pick-up both in X and Y direction. also measuring the height of the part with a laser sensor.
Electronics Forum | Mon Jan 30 13:19:37 EST 2012 | deanm
Now knowing that its a Quad, I'm assuming it has QuadAlign which spins the part it just picked in a beam of light and a sensor measures the length, width and height of each part. If it falls outside of a defined range, it will throw it in the dump bi
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
