Electronics Forum | Fri Sep 08 13:46:54 EDT 2023 | carl_p
UIC still support the Genesis platform, get a quote for repair which will be high & try to push it back onto whomever is at fault.
Electronics Forum | Tue Feb 15 19:54:48 EST 2000 | Clarissa Ortner
I am supposed to heatsink a Temp sensor with leads .9-1.1mm(.035--43"). I have found on our engineering units that the smallest heat sink I have found commercially is still too heavy for the leads and unless the operators use exxxxtreme care the wei
Electronics Forum | Tue Feb 15 19:54:48 EST 2000 | Clarissa Ortner
I am supposed to heatsink a Temp sensor with leads .9-1.1mm(.035--43"). I have found on our engineering units that the smallest heat sink I have found commercially is still too heavy for the leads and unless the operators use exxxxtreme care the wei
Electronics Forum | Thu Oct 12 04:48:54 EDT 2000 | Marc
Does anyone know where I can get waffle trays for a PLCC44 package???
Electronics Forum | Mon Apr 14 13:24:46 EDT 2008 | ethancw1sel
Anyone have good luck rounding up part numbers for Assembleon part numbers for their feeders? It's rough trying to get them through the company it's self, and the manual's are not that helpfull.
Electronics Forum | Mon Apr 21 10:50:13 EDT 2014 | cyber_wolf
The top PoP part is what gets dip fluxed or dip pasted. We have had warping issues with these components before but it is almost always the top part. My guess would be bad components if your reflow profile and print process is good to go.
Electronics Forum | Fri Feb 17 11:40:02 EST 2012 | swarnergictg
All standards are available for download for a fee from the respective websites. Getting caught selling counterfeit components could cost you millions, the loss of your business, and jail time. Paying for the standards and proper training courses/ce
Electronics Forum | Tue Aug 23 11:06:05 EDT 2005 | molosse21
Hi, We started to get more and more parts RoHS compliant on our smt line. The operator is sending me back a reel of componenent (0805)resistors and he is telling me that solder wetting is poor and unnaceptable due to oxydation deposit over the leads
Electronics Forum | Thu Apr 17 07:51:19 EDT 2014 | emeto
Opens are on the device to the PCB - mainly on the edges, that makes me think I get some kind of warping,but even if I bake parts and boards doesn't help. We also tried different reflow profiles - same results. I hear that some people use dip fluxers
Electronics Forum | Wed Feb 15 17:16:54 EST 2012 | davef
To get started look here: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=61862 On your lingering disbelief of your suppliers truthfulness in the C of C: Periodic auditing of their truthfulness by your QA peeps or a third party is an acce
