Electronics Forum | Tue Jan 30 12:03:15 EST 2001 | slthomas
Pete, I'm wondering how much optimisation you needed (or were allowed) to do with respect to connector design. The first one we evaluated had a row of leads that I can only describe as "crescent" shaped in cross section. Impossible to get even 50%
Electronics Forum | Mon Aug 20 07:17:36 EDT 2012 | ericrr
Hi we have Juki KE-750L's is there any program to work out how many parts left on the reel, on the machine, the placement program does have a option to keep this number, but once you finish the run and start a new run the figure is lost. Unless I mis
Electronics Forum | Wed May 22 13:25:45 EDT 2002 | melsolutions
There is a system that Sony uses called Timms. This system has been used worldwide at Sony Electronics manufacturing facilities for over 12 years. They are selling the software package to customers now as a whole full functional product. They have
Electronics Forum | Tue Jan 30 01:32:24 EST 2001 | PeteC
Bill, We do solderpaste reflow on through-hole here every day on plated-thru-holes. We do it on connectors only. It is a reliable process. We use no special profile. The stencil apertures must be modified for this process. Check out the IPC-7525 "St
Electronics Forum | Thu Sep 13 17:57:59 EDT 2001 | davef
You're correct. It is curious. Possible angles to look at are: 1 WS609 loves moisture in the air. In high humidity shops, this paste hakes-on liquid. If this is the case, you should also see slumping, resulting in fine pitch bridging, and solder
Electronics Forum | Tue Oct 25 15:19:15 EDT 2005 | jimmyjames
Sorry this is such a long thread but I would like as much input as possible to everything I ramble on about... :) ------------------------------------------------------ We are now seeing more and more RoHS parts showing up in our SMT inventory and
Electronics Forum | Wed Feb 16 20:50:57 EST 2022 | mihai_voivod
Its hard to answer your questions with fuzzy pictures, no background, or a schematics/BOM. Your best bet for good answers is to contact the manufacturer or obtain another board so you have spare parts. In the 1st picture The epoxy is there probably t
Electronics Forum | Fri May 01 00:27:12 EDT 2009 | rodrigo
Hi all, We had a servo amp replaced (SA-6) and the machine worked with no problem for the first panel (this panel of 10 only needs a TQFP100 from the MTU). Then I got the "Servo NG" error again. One of the servo paks showed a "7" on the LED. The err
Electronics Forum | Wed May 17 11:59:27 EDT 2006 | james
Did you have to get the controller as an option?
Electronics Forum | Fri Feb 15 15:50:55 EST 2002 | Bruce
The CP-642 simply requires a camera upgrade for 0201 parts. This is the same camera as is used on the CP-643. You should then get identical results
.gif)