Electronics Forum | Fri Jun 03 14:31:33 EDT 2005 | Peter
I am working on an application requiring removing BGAs from a board coated with parylene. These BGAs have low standoff with less than 0.015" after SMT soldering. Can some comment on a reliable and consistent process to perform such rework? given tha
Electronics Forum | Wed Jun 08 13:06:36 EDT 2005 | jimby
You will have to machine the part off down to the top of the balls. Wick solder off from individual sites one at a time. All that will be left is Parylene shell where balls once were. Take an orangestick and alcohol to break up and remove. Tricky par
Electronics Forum | Mon Jun 13 07:44:15 EDT 2005 | bandjwet
Peter: Based on our company's experience with removing a variety of different coatings, including parylene, the BGA's can be removed. We would use a chemical etch followed by a neutralizing process. We would then reflow the devices and pry them off
Electronics Forum | Fri Jun 03 16:35:40 EDT 2005 | davef
We've never tried to remove Paraylene from a BGA, but we stayed [in seperate rooms] at the Red Roof Inn. Parylene/Paraxylyene is a great coating and can be selectively removed by several methods. IPC-7711 (Rework of Electronic Assemblies) has a sect
Electronics Forum | Wed Jun 08 15:50:32 EDT 2005 | davef
Microshot blasting suppliers that recognize steps must be taken to control potentail dmage from ESD are: * Comco 2151 North Lincoln Street Burbank, CA 91504-3344; 800-796-6626 818-841-5500 F818-955-8365 info@COMCOinc.com http://www.comcoinc.com * CC
Electronics Forum | Wed Feb 19 06:20:05 EST 2014 | bandjwet
These micro ablation stations can be outfitted with air ionizers and you can use less electronegative materials like corn starch as the blast media. Laser ablation works on parylene and other coatings when on metal surfaces. BWET
Electronics Forum | Fri Oct 18 12:40:35 EDT 2013 | robertwillis
Back in the mists of time there were two papers on the use of Parylene Coating and the improved thermal cycling results in 1990. It was on LCCC then shortly after on BGA. Does anyone know of results of recent trials or have a copy of the BGA papers.
Electronics Forum | Mon Apr 26 15:10:46 EDT 2004 | pjc
Parylene coating is done in vacuum curing chambers. This process drives the material under components and into all nooks and crannies. There is nowhere on the board assembly that can escape from the material! I've only seen Parylene coating process u
Electronics Forum | Thu Apr 10 11:26:10 EDT 2003 | Lake
Does anyone have any experience with parylene coated BGA's. Can they be masked so parylene doesn't get underneath? How do you remove and replace? Is machining them off the only viable option? If so are there any special requirements /special fixturin
Electronics Forum | Thu Apr 10 11:26:18 EDT 2003 | Lake
Does anyone have any experience with parylene coated BGA's. Can they be masked so parylene doesn't get underneath? How do you remove and replace? Is machining them off the only viable option? If so are there any special requirements /special fixturin
