Electronics Forum | Tue Mar 18 07:53:39 EST 2003 | Paul Staniford
I am looking at dispensing solder paste using a Fuji GLV glue dispenser. This is to enable us to produce prototype pcb's without the need to purchase a stencil. Has anybody tried this before? If so what problems should I expect to encounter.
Electronics Forum | Wed Jan 30 09:37:28 EST 2002 | clarkk
Does anyone out there have experience dispensing solder paste with a Universal GDM (4716AL) with positive displacement pumps? I'd like to hear any comments on the success or failure of the machine to dispense consistently, effect of temperature varia
Electronics Forum | Tue Mar 18 09:09:37 EST 2003 | pjc
The FGLV has a air pressure displacement valve, which is designed for adhesives. A positive displacement valve is better suited for solder pastes. Check with Fuji to see if they offer optional valves.
Electronics Forum | Wed Jan 30 12:22:06 EST 2002 | jax
Clark, The universal GDM should handle your application with ease. Although not as accurate as an archimedes screw, the positive displacement pump of your GDM will still be well within any tolerances if maintained and operated properly.. Not to me
Electronics Forum | Tue Mar 18 09:11:14 EST 2003 | Rob C
With a standard valve and no-clean solder paste you may get a few good dots. But, repeatability will be terrible too many variable, air-pressure, board height (two post nozzle), valve time on/off, retract height, retract time, etc... A RMA paste wi
Electronics Forum | Fri Jul 09 11:19:58 EDT 1999 | Carol Brumfield
Has anybody successfully used an automated dispensing system to put solder paste dots on .5 mm pitch pads?? I need to replace some Meritec tsop sockets and I don't want to use the single site stencils for .5 mm parts.
Electronics Forum | Thu Mar 31 12:25:53 EDT 2016 | nicole0506
Thank you Chris!
Electronics Forum | Sat Jul 10 12:18:10 EDT 1999 | Steve
| Has anybody successfully used an automated dispensing system to put solder paste dots on .5 mm pitch pads?? I need to replace some Meritec tsop sockets and I don't want to use the single site stencils for .5 mm parts. | Try http://www.winslowaut
Electronics Forum | Tue Mar 29 13:58:52 EDT 2016 | nicole0506
Hello! My name is Nicole and I'm new here :-) I hope you could help me...we recently bought an Ekra X5, and I was informed that it could dispense paste on the stencil on her own, using a cartridge that is placed near the squeegees. Can anyone tell me
Electronics Forum | Thu Jul 15 09:27:12 EDT 1999 | Erick Russell
Earl, Srt makes a system called the summit 2100D. Its a relatively new product but it is designed for rework applications. The programming is simple and interfaces well with other srt products. As with any dispensing system, you have to clean th