Electronics Forum | Sun Feb 27 14:24:05 EST 2005 | davef
pmdeuel: Was that "about 60 %solder and 40 % flux" according to volume or weight?
Electronics Forum | Thu Apr 03 22:56:48 EDT 2008 | davef
Potential impacts of using expired solder paste are [University of Bolton]: * Changed paste rheology. Result: poor print quality * Loss of solvents. Result: reduced flux activity * Changed flux formulation. Result: More difficult to clean flux residu
Electronics Forum | Sat Dec 18 15:23:05 EST 2004 | grayman
We used to add flux on a "expired" solder paste but we discontinued as there are many problems and customers complaints coming from our American customer. Like unwetted solder pads,dull and cold solder and many others. The profit is really ok but qua
Electronics Forum | Wed Mar 14 19:32:04 EDT 2012 | swag
You're not clear if you intend to reclaim and re-use the paste from the stencil or not. If not, then you should go to cartridges with an air gun or modify a caulking gun for dispensing paste from cartridges. The paste will last a long time.
Electronics Forum | Mon Dec 17 08:34:58 EST 2012 | emeto
I would scrap it. As you said part of it is going to be old paste. All manufacturers don't recommend mixing old with new paste because you change the rheology of the paste.
Electronics Forum | Fri Dec 17 09:48:50 EST 2004 | grayman
I agree with dave. However, if you can not afford those expensive cartidges, you start putting enough solder paste on the stencil so to minimize waste. I agree you have to dispose of the excess dried up solder but if your process is not very critical
Electronics Forum | Mon Apr 12 16:03:40 EDT 2004 | swagner
Can you go to a .004" stencil?
Electronics Forum | Wed Feb 23 15:06:05 EST 2005 | Zlatan
Would you be able to share with me, what specific abnormal chemical reaction could happen? Thanks
Electronics Forum | Sat Jan 07 06:43:44 EST 2006 | davef
Metal is about 50 percent by volume
Electronics Forum | Thu Apr 26 13:17:10 EDT 2007 | jerrysaise
�It adds NO VALUE whatsoever to do 3D inspection as part of in-line production.�