Electronics Forum | Wed Jul 29 10:27:01 EDT 2015 | risorse_new
Goodmornin I have a problem with the fixing and move cameras, i don't see the image of the cameras on the screen. On the monitor i see the cross and letter, but i can no see on the black box the camera images. I know the problem is on the ADDA Board.
Electronics Forum | Thu Aug 19 15:49:05 EDT 2004 | pjc
Hi Erhard, Go to http://www.globalstencil.com They are the stencil firm that worked with MPM for developing technology for printing with thick stencils that are milled out on the bottom to account for existing components on the top side of a PC boa
Electronics Forum | Sat Mar 31 11:03:21 EDT 2007 | jmelson
I have a left to right conveyor, so the X offset is larger, but that is not major. You say "Make sure you are teaching with the unit that the machine defaults to or asks for." This is the beam sensor, and I have found no way to change this, either
Electronics Forum | Thu Nov 19 09:55:47 EST 1998 | Dave F
| | | | | | | For some as yet unkown reason, we have started to have some boards sag and go under the wave. The boards are surface mount top side and conventional components wave soldered. We have checked the wave hight and both the profiles on the w
Electronics Forum | Thu Sep 19 16:58:45 EDT 2019 | kylehunter
So.. I thought I had fixed the issue, but it seems not. The issue that was causing the fiducials to not be found, I 100% have solved. The board was not reaching the stopper before being clamped, causing the board to be a few mm's offset. I added a de
Electronics Forum | Tue Aug 02 12:05:37 EDT 2016 | ttheis
Leave a circular area around the fiducial without any mask so bare board is shown.
Electronics Forum | Tue Aug 02 10:46:03 EDT 2016 | proceng1
We are getting more and more customers wanting LED boards built on White Solder Mask. Well our printers do not get as much contrast between the white mask and the plated fiducial pad, and often the camera only sees white. Other than playing with
Electronics Forum | Wed Aug 27 07:13:05 EDT 2008 | eyalg
I need to solder SAC/HASL PC boards in a NON ROHS process (Tin Leaded solder paste and profile + Tin leaded components) Can I do that?? Regards, Eyal
Electronics Forum | Fri Dec 17 09:04:17 EST 2010 | wolverine
We have an older model CP40-LV that will start out the day with blurry and double vision, then after about twenty minutes of just idling, the vision slowly improved until the machine could find the board fiducials and do a passable placement job. Th
Electronics Forum | Fri Jul 26 20:20:06 EDT 2019 | kylehunter
This week we assembled around 30 panels of a LED board, totaling around 350 boards. In doing so we had to work around a really crazy issue. 1) A board goes in, all components are placed perfectly. 2) Next board goes in, all components are around 5m
