Electronics Forum | Fri Sep 13 18:58:12 EDT 2002 | slthomas
I can't give you itemized values for each defect category because we don't ask operators to distinguish between them, and we haven't done any serious research to do so either. I do wonder this, though. I read data somewhere from 14 years ago statin
Electronics Forum | Sat Sep 14 12:24:44 EDT 2002 | scottefiske
We need to remember here that as printer manufacturers were enhancing their product lines, miniaturization was quickly being developed in the background. In the last 2 years I was involved in developing and conducting a D.O.E./F.M.E.A in determining
Electronics Forum | Thu Mar 16 08:34:28 EST 2006 | cyber_wolf
Larry, I have said this on the forum before. THE ONLY WAY TO KNOW IF OVEN HEATER SET POINTS ARE CORRECT IS TO ATTACH THERMO COUPLES TO YOUR PC BOARDS AND RUN A THERMAL PROFILE WITH A DATA-LOGGING DEVICE! Anything other than that is nothing but a gu
Electronics Forum | Thu Mar 16 12:22:21 EST 2006 | stepheniii
Larry, I have said this on the forum > before. > > THE ONLY WAY TO KNOW IF OVEN HEATER > SET POINTS ARE CORRECT IS TO ATTACH THERMO > COUPLES TO YOUR PC BOARDS AND RUN A THERMAL > PROFILE WITH A DATA-LOGGING DEVICE! > > Anything > other than t
Electronics Forum | Thu Apr 04 12:52:48 EDT 2019 | rodrigo
Hi, Our MCS30 had a bad backup battery in one of the boards. After changing the battery I got the all boot devices failed error. I managed to get a hold of some boot floppy disks and I can use disk1 to boot the MCS30 to a "$" prompt. I also have a di
Electronics Forum | Thu Jul 08 10:43:24 EDT 2004 | stevecrowley
bobpan, Finally got the Qsoft to work. We were not setting the Shared RAM resources IRQ's, I/O and Memory. Now we are trying to get the RT to talk to the GUI. Will update on our progress
Electronics Forum | Sat Jun 14 09:28:27 EDT 2008 | torch
im currently trying to get the audio responses working with QSoft2 as our machine didnt come with a soundcard ive managed to find an old ISA card and get it installed. its a creative soundblaster so quite a well known brand and easy to install, win98
Electronics Forum | Sat Jun 02 13:57:30 EDT 2007 | rodrigo
Hi all, We have an MCS30 connected to a CP6 and CP4 smt machines. Every time we need to set up a job, the operator has to type the data at the MCS30 terminal. We already have this data in a Windows PC file. I saw a ethernet and several unused serial
Electronics Forum | Thu Jul 09 12:47:09 EDT 2009 | janz
Hello, We are using F4G software for our Fuji machines. We've 5 machines plug into PC. Recently we tried to connect PC to local network but this only after while close C/C server without possibility to reopen C/C server. Reseting PC gives C/C lice
Electronics Forum | Mon Jul 08 17:07:15 EDT 2013 | wsdauchy
We have 2 CS9100 Schleuniger wire cut/strip machines. They do not have the DISPLAY/PC switch on the back of the CPU card. THe two machines come up PC mode. Any one know of a jumper setting on the CPU board that will allow the machnies to run in DI
.gif)
