Electronics Forum | Wed May 16 17:54:31 EDT 2007 | johnwnz
why not use your std profiler that you use for your ovens? if you want real time then hook it up to the PC running the ersa or stick the software on the laptop. If you suspect that your profile is drifting you need to get yourself a good repeatable t
Electronics Forum | Tue Mar 23 03:42:51 EDT 2010 | grahamcooper22
Hi, It is very important to follow IPC JEDEC 33 specification for storage and handing of all MSDs. In many instances defects caused by excess moisture in packages is not immediately evident (pcbs may pass final test) but when pcb has been in the fiel
Electronics Forum | Tue May 25 12:43:00 EDT 2010 | jmedernach
I don't have experience with 1B73. I do have a ton of experience with CE-1155. There are a couple of gotchas with this material. First and foremost is that it HATES silicone residue. If the material is not sticking to parts and they aren't cerami
Electronics Forum | Fri May 18 12:21:28 EDT 2001 | camohn
When it comes to how much epoxy [aka. "glue"] to dispense to hold a IC or any part with significant mass, on the bottom of a board for wave soldering, is more better? The way I see it, one good dot should be holding such a part on the PCB. If not, th
Electronics Forum | Wed Sep 26 14:58:46 EDT 2001 | bobm
i have stored boards in the refrigerator in side a tray (with a lid) for 2 days and still had them reflow with no problems. i don't know if i would go any longer than that. i would not put any qfp's or any other device that is moisture sensative dev
Electronics Forum | Wed Dec 17 10:25:47 EST 2003 | blnorman
I may have asked this question before but couldn't find anything when I ran a search. Question, after ultrasonically cleaning our boards we bake them out to drive off residual moisture. Current requirement is 24 hours @ 105�C. I seem to remember a
Electronics Forum | Tue Aug 25 08:04:26 EDT 2009 | davef
Trapped moisture can be a problem, and one standard recommends baking a PCB for a minimum of 4 hours at 93+/- 5.5ºC before conformally coating. [NASA-STD-8739.1, “Workmanship Standard for Staking and Conformal Coating of Printed Wiring Boards and Ele
Electronics Forum | Thu Dec 17 08:27:09 EST 2020 | gort
Hi all Wonder if anyone can help , I'm trying to test a pcb board ( with very little experience) I've tested the resistors and now the capacitors , only to find that about 5 of them have continuity so guessing there not working . I checked the s
Electronics Forum | Mon Aug 08 21:43:23 EDT 2005 | plcc
Hi Davef, After reflow, the pcb board turns yellowish color. However, the board still pass thru' functional test.
Electronics Forum | Thu Jul 18 12:05:19 EDT 2002 | yngwie
Experts, Today I received PCB in a punctured vacuum seal bag. the Humidity indicator change the colour to pink at 60%RH mark. The brd finish is Entek. Earlier our intention to get the board vacuum seal is because we want to ensure that the is no fr
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
