Electronics Forum | Thu Jun 07 05:11:42 EDT 2012 | cp38260
Hi, I have pcbs (Duroid/RT 5880) with raw copper, soldered in vapour-phase chamber at 230 degrees Celsius. During soldering, copper gets tarnished. Cleaning with Vigon A250 removes the tarnished layer. Indeed, in the VigonA250 techn. datasheet it is
Electronics Forum | Sun Sep 15 21:44:41 EDT 2002 | jason
Hi Dave, Immersion Ag has poor surface appearances after reflow or rather tarnished, while Immersion Tin requries higher temp. Probably that's why Immersion Ag is more preferred.
Electronics Forum | Tue Apr 09 16:19:37 EDT 2002 | Peter L.
Has anyone built using the ALIVH PCB (0402, 0.8mm pitch uBGA) on the SMT line? I would like to know any process issues (paste printing, p&p, reflow) related to processing this pcb. Specifically, what type of solder paste was used (no clean) and wha
Electronics Forum | Tue Jan 10 10:26:11 EST 2006 | mikeattekfab
I am considering using a vapor degreaser to clean PCB's after they emerge from our wave. Does anyone have experince with this process that they would be willing to share?
Electronics Forum | Sat Jun 12 17:01:44 EDT 1999 | Murray Pulman
We are using so called no-clean fluxws for our small batch production, however the results are not always very visualy pleasing with white powdery deposits being the norm. I would like advise on the best avenue to explore for a small batch cleaning s
Electronics Forum | Tue Jan 10 14:34:40 EST 2006 | Amol Kane
arent there environmentally friendly solvents (i have seen some from 3M) that can be used in a vapor degreaser. i was also planning to use the vapor degreaser to clean boards prior to conformal coating
Electronics Forum | Tue Oct 11 10:49:14 EDT 2005 | jhagve
HI We start to make a product which have a 0.4 mm pitch IC and start having problems with not enough solder printed, to solve this problem we had to increase the manual cleaning, now we are cleaning the stencil every 8 printings, before we was runnin
Electronics Forum | Tue May 30 10:55:57 EDT 2006 | bryanhewson
I am a lay person researching the application of non-woven material in stencil rolls either using branded material or non-branded alternatives for DEK, MPM Panasonic machines in SMT environments. I have read a number of articles referring to aqueous
Electronics Forum | Tue Jan 10 14:04:38 EST 2006 | Mike Konrad
Flashback time� Vapor degreasers, although still used in limited applications, no longer represent the conventional wisdom (due to multiple environmental issues). Aqueous-based technologies are the most common method of defluxing. Unlike most va
Electronics Forum | Tue Jan 10 20:39:06 EST 2006 | aqueous
Of course there are solvents which are less harmful to the environment than others. The operative phrase is �less harmful�. As a rule, water-based chemistries are �greener� than solvents. There are some solvent blends designed for aqueous-based eq
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
.gif)
