Electronics Forum | Mon Nov 03 07:47:47 EST 2008 | jdengler
mickd, I prefer a rail of 7.62mm (0.300"). This alows for the tooling pins and fiducials without any trouble and minimizes the waste. A fiducial of 1mm round with a 1mm clear area around it. Jerry
Electronics Forum | Sun Feb 23 14:51:02 EST 2003 | davef
Without being clear on whether you're talking about: * Standard air knives at the back-end of your in-line cleaner ... OR * Hand held or similar nozzle. Standard air knives: This causes no problem with ESD because the relative humidity is so high t
Electronics Forum | Tue May 14 04:18:40 EDT 2013 | leardkattiya
Hi, Anyone here experienced in aqueous wash of chamber type? Here's the issues. We have top and bottom portion inside the chamber but unfortunately evaluation had indicate only top portion of the rack is able to clean the PCB clearly.
Electronics Forum | Wed Sep 26 10:05:41 EDT 2012 | testbloke
Although we do not have any soldering issues with our OSP PCB's, I am trying to establish clear rules with regards pcb storage and shelf life. Our PCB's are supplied in metalised moisture barrier bags but without desicant, our current rules as follow
Electronics Forum | Wed Mar 03 10:52:57 EST 2010 | isd_jwendell
I agree with Graham. What isn't clear is the cause; Was the PCB layout not correct for the device, or was the component not placed properly.
Electronics Forum | Tue Dec 31 01:30:07 EST 2019 | sssamw
Do you have clear pictures show IC soldering and the solder ball? DO you have clear picture show the PCB pad?
Electronics Forum | Mon Oct 31 18:05:41 EDT 2011 | janz
Hi If you want to clear bare pcb try to visit teknek company website, they are making roller type cleaning machine. I used similar solution before with good results.
Electronics Forum | Wed Jun 09 11:38:20 EDT 1999 | Roseann
In past PCB designs I have cleared all traces from all layers (except pwr/gnd) from fiducial area. It has come to my attention that this is only necessary on the side where fud is placed. Which is the correct method of design using a fidicial?
Electronics Forum | Sun Aug 06 20:50:57 EDT 2017 | leadthree
We have a client that wants to export modules to the USA, which they didn't do so far, and ask for UL status. I am a bit unclear about that, so I wonder what is needed? For the PCB it's clear, must be from a UL supplier. Does the UL number has to b
Electronics Forum | Mon May 10 15:26:11 EDT 2004 | hertenstein
Sorry, I was not clear. I am interested in the strain on the PCB during depanelization using a parallel blade shear. And the effect on ceramic capacitors on the PCB. I was not shearing the capacitor off of the PCB. Regards, Jeff
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
winsouce.jpg)
