Electronics Forum | Fri Jun 01 23:57:21 EDT 2012 | bwjm
HI Guys, i am facing similar issues with this BT resin material too. PCB specs are 4 layers, Nelco400013, same Tg and Td. My PCB delam after reflow. The PCB has both side mounted with SMDs. Initial mounting on the btm side after reflow, no delam. B
Electronics Forum | Mon Sep 06 20:18:37 EDT 2004 | charly
hi, we are running high mixed low volume here, and i encounter many pcb delam after reflow issue. here some doubt need ur advise: 1. actually, what is max temperature and duration can a bare PCB reflow without any quality problem? if i allow bare
Electronics Forum | Thu Nov 16 10:15:12 EST 2006 | SWAG
Does anyone have new info on their ROHS PCB delam. problems? We ran two profiles (different from ours) per supplier recommendations with no improvement on this problem. These profiles included a plateau or soak at 190 deg. C for 20 seconds and a sl
Electronics Forum | Thu May 31 22:35:23 EDT 2012 | jacktan
I have encountered PCB delam issue with high density PCB. PCB has 42 layers , 5 mm thickness ,laminate material is NelcoN4000-13EP,Tg 210C and Td 350C. Have pre-bake at 125 c for 12 hrs before assy.My reflow temp is standard with 243 peak and TAL is
Electronics Forum | Fri Aug 27 00:26:14 EDT 2004 | charly
hi, encounter few cases PCB was delam after reflow, and the supplier was refuse that this is a PCB manufacturing defect as the fallout is low within one lot. the cost for this scrap is high after PCBA level, my query here are 1) is there any way
Electronics Forum | Mon Nov 13 13:15:51 EST 2006 | CK the Flip
Tg, by definition is the glass transition temperature for materials. It's the temperature where your board goes from rigid to "rubbery". Not sure if a higher Tg would help prevent delam. One of the PCB experts of the forum might know this.
Electronics Forum | Mon May 21 10:25:16 EDT 2012 | swag
Ask for board fiducials if you're running arrays. Global fids on the panel do not work well. One handy product we use on flex is "Tacsil". Works well on SMT pallets as well as router operation. It's double sticky stuff that helps hold on to the P
Electronics Forum | Fri Jun 01 05:12:09 EDT 2012 | aj
could be down to board design also - are you seeing the delam in the same area all the time?
Electronics Forum | Tue Oct 24 09:52:35 EDT 2006 | SWAG
We are having the exact same problem! We do about 6 or so ROHS SMT builds. 5 are fine now but we had problems with most initially and 1 is trouble still. All boards are same material, same PCB manufacturer. Initially, when the delam. problem occu
Electronics Forum | Mon Nov 06 16:27:48 EST 2000 | Boca
Bingo! Sounds like you solved your mystery. You've checked your key process steps, the product has been running in your processes for some time with no process changes. This all points back to one of your process input, i.e. the fab. Experience s
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
.gif)
winsouce.jpg)
