Electronics Forum | Sun Oct 27 07:56:58 EST 2002 | wongmanchung
Does any expert here know the specification of board deflection when we mounting component by pick and place machine? That is when the nozzle place the chip on the pcb, the board will have some deflection. And are there any requirment that we need t
Electronics Forum | Wed Oct 30 01:23:19 EST 2002 | jasper
Normally warp max 1% of diagonal board measurement is acceptable. What's your p&p like? Some will not experience problems at all! reg Jasper
Electronics Forum | Wed Nov 06 12:52:28 EST 2002 | charlie
Check out one of the board suppport that are currently available: Grid-Lok, Formflex and others. These systems are available for many models of printers and P&P. They automatically set up to any board, first or second side, and provide excellent su
Electronics Forum | Mon Oct 28 07:07:39 EST 2002 | cyber_wolf
It has been my experience that when all conditions are as they are supposed to be there should be zero or very little deflection. When you start placing components with pick and place equipment that does not have a Z pressure sense, you run the possi
Electronics Forum | Mon Oct 28 18:59:25 EST 2002 | tkenny007
Specs for Bow and Twist for PCBs (IPC-A-610C, 10.6. There may be an update by now). I also have a note in our quality guide referencing (IPC-TM-650, 2.4.22) and (MIL-STD-105D). In summary, a PCB should not bow more than 0.040" with all four corner
Electronics Forum | Wed Oct 30 01:23:22 EST 2002 | jasper
It has been my experience that when all > conditions are as they are supposed to be there > should be zero or very little deflection. When > you start placing components with pick and place > equipment that does not have a Z pressure sense, > yo
Electronics Forum | Thu Feb 04 04:16:56 EST 1999 | Joni Siipola
I'm researching SO-8 power RF device mounting methods. Possible mounting method 1. Via thru holes Still the thermal resistance of the PCB too high Do you have suggestions for mounting the component, PCB/?
Electronics Forum | Thu Feb 04 20:31:10 EST 1999 | Dave F
| I'm researching SO-8 power RF device mounting methods. | | Possible mounting method | | 1. Via thru holes | | Still the thermal resistance of the PCB too high | | Do you have suggestions for mounting the component, PCB/? | Joni: What is it ab
Electronics Forum | Thu Oct 24 03:28:45 EDT 2019 | mfurlandea
Hello, i need an information about Fuji Aimex II and the problem when you have a multi offset pcb and you need to mount some offset with one program and the rest with a different program. So process dispense paste, mounting, changing program and moun
Electronics Forum | Fri Feb 05 04:18:44 EST 1999 | Joni Siipola
| Joni: What is it about your situation with the board/component/process that makes you want to explore alternatives? Dave F Dave: In our case the component is placed on metalled footprint which has via holes to transfer the heat via holes to the
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
