Electronics Forum | Tue Jun 05 22:18:47 EDT 2001 | Dreamsniper
I don't understand why you wanna do this. The vendor has done this part for you and actually they have a recommended glue / solder paste life on the stencil or pcb (e.g. 6 hrs, 8 hrs.). If you will stick with their recommendations you won't be lost p
Electronics Forum | Wed Mar 03 15:48:31 EST 1999 | Timothy Loose
What do you recommend for engineering lab SMT tools? We'll be doing general PCB assembly and repair, fine pitch and others.
Electronics Forum | Fri Jan 21 09:31:38 EST 2005 | clampron
Good Morning Everyone, Does anybody have any information regarding the recommended storage environment for PCB's with tin plating? Any help would be greatly appreciated. Thanks In Advance Chris
Electronics Forum | Thu Apr 10 19:21:02 EDT 2003 | tony_sauve
Kevin, One point that I'd like to make is that in order to get an accurate reading of the solder joint temp's you need to have the thermocouple right at the ball/PCB interface. I'd recommend precision drilling a mechanical sample of the unpopulated P
Electronics Forum | Mon Jun 03 15:10:48 EDT 2019 | emeto
Page 43 in the datasheet is giving you all detail how the stencil should look like...if this is what you need to do. Page 42-43 shows the geometry of the part and recommended land pattern for the PCB ...if this is what you need.
Electronics Forum | Tue Aug 30 22:38:54 EDT 2005 | cabs
Does any one knows where to get a plating thickness meter that can be use in the fine pitch contacts and trace in PCB application like BGA pads? If there's a hand held device at lower cost much better... Also if you can recommend companies that offer
Electronics Forum | Wed Feb 11 16:38:20 EST 2015 | barryg
I was curious what others in pcb assembly are doing as far as profiling. Is profiling an important part of the smt process? Should every board type processed be profiled to determine optimum oven temps per paste recommendations.Is it ok to assume tha
Electronics Forum | Fri Jan 15 17:53:43 EST 1999 | Earl Moon
| Jason, | | Have you looked at Manex software. I know they have a great reputation in the electronics industry since they developed their system around electronics specifically. | | Check out this article I found...this may help. Email with a
Electronics Forum | Fri Aug 09 11:58:52 EDT 2002 | sam_b
Just started doing BGA rework. After the removal of the "old" component and after site cleaning/component reballing I am ready to install the component on the PCB. It is recommended to apply flux or paste to the board/component. I would appreciate m
Electronics Forum | Mon Oct 23 21:54:03 EDT 2017 | wendymm
Hey, guys. I have decided to make my own PCB boards recently,but confused about which design software to choose. Summarized the info. on the net and other people's recommendation,there's 5 options, Diptrace, Eagle, Circuitmaker 2000, Kicad, and PCB12
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
