Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Tue Aug 24 05:33:08 EDT 2004 | itamar
hello though more than a month has passed since you replied to my massage i will be more than happy to ask you several questions about the laser marking machine your company uses. my mail is : itamarc@visonic.com many thanks itamar
Electronics Forum | Mon Jul 12 14:00:37 EDT 2004 | blnorman
We've been using lasers to mark barcodes on our boards for some time now. We use a CO2 laser to burn through the solder mask on most of our boards. The machine is enclosed so the operators aren't exposed to the laser. The laser is also mounted on
Electronics Forum | Mon Oct 09 18:40:43 EDT 2006 | darby
Seeing you are already using Quad; I'd look at a Samsung CP-45V. I believe your feeders will be compatible but please cheeck to make sure! These are a six head, on the fly machine that will do just about anything you want apart from gripper applicat
Electronics Forum | Tue Oct 10 15:14:43 EDT 2006 | mfoster
Hi Phil, Most parts are still available for the Quad/Samsung QSA-30, through Dynatech (in North America). It is actually a single gantry, 3 spindle machine with rated speed of 14,000 cph. As with any used machine, it could be a great deal or a not
Electronics Forum | Mon Oct 09 07:50:22 EDT 2006 | quad
We currently run two Quad IVC's (we are very pleased with them) and two Versatronics for simple small volume batch work. We now need an additional machine capable of placing components at least three times as quickly as a IVC. We don't do anything ve
Electronics Forum | Mon Oct 09 13:36:30 EDT 2006 | ppminc
Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made
Electronics Forum | Fri Mar 12 10:15:18 EST 2010 | adrnbntz
Any one know how to operate a AQ-400CL, SMT400CL cleaning machine, Bought a used one with out manuals... Please need help..need manuals or quick start-troubleshooting guide. Thx. Adrian
Electronics Forum | Sun Dec 02 16:18:22 EST 2012 | sarason
A few years back when I was working in a Hybrid company we used carriers machined from aircraft grade aluminum. Its easy to machine on a Mill doesn't bend so easy when mishandled.The thing to know is do your flex circuits sit flat when placed on the
Electronics Forum | Mon Aug 27 11:11:16 EDT 2012 | rway
We have 1/2 dozens 0.031 pcbs that bow after going through the oven. We are looking for a solution to this problem to prevent bowing of the pcbs. As a result of the bowing, the pcbs, on occasion get caught in the oven, and more often have transfer
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
winsouce.jpg)
