Electronics Forum | Fri May 14 11:14:57 EDT 2010 | thanh
wow, no one can figure out why it doing that????
Electronics Forum | Sun May 16 00:07:58 EDT 2010 | tpappano
I have a Philips CSM84VZ. There are offset calibrations that compensate the X and Y distances from the camera to the heads and the beam pointer. Perhaps yours is similar and just needs a small Y adjustment for the beam pointer.
Electronics Forum | Wed May 05 16:12:30 EDT 2010 | thanh
after calibration, now i'm having an issue that placement between lazer and camera off about .5mm on the Y mount. if parts go to camera, the placement are good. but parts that placing with lazer it off about .5mm at Y for all rotation. anyone seen t
Electronics Forum | Tue Jun 01 15:06:40 EDT 2010 | thanh
I did. Nothing change. I can go in mount feed back and increase .5mm for all rotations(Lazer mount feed back), then it work. But all my parts go to camera will be off the oposite way.
Electronics Forum | Sat May 29 02:20:08 EDT 2010 | vinitverma
Mch Adjust > Adjust Target > Laser Unit > Nozzle Position. Here the laser will automatically detect the centre of the nozzle. Remember - It'll give you the option of using a component for the test but DON'T use any component. Let it detect the centre
Electronics Forum | Fri Nov 30 00:51:10 EST 2007 | vinitverma
Here are the differences (Eclipse vs Eclipse II) Optimum Speed: 5000 vs 6500cph Feeder Positions (8mm) : 80 vs 94 PCB Loading Time : 4s vs 5.3s PCB Thickness : 0.6-3mm vs 0.5-4mm Max Component Size : 32mm vs 45mm (optional camera possible on Eclipse
Electronics Forum | Mon May 18 06:33:10 EDT 1998 | Odyssey
I am interested to buy some Yamaha feeders! 8mm, 16mm and 24mm for Hyper series YM-84II. Can You help? | The thread on GSM's inspired this: We have a tough time making the trade-off on GSM's work. The next option we like is the Philips (Yamaha) Em
Electronics Forum | Thu Nov 22 09:21:05 EST 2007 | hsodan
Hello, If somebody can point out few most important differences between those two models I would be grateful. We are shopping for used machine, but the spec's we get for both models are the same, the price not, even if comparing machines with similar
Electronics Forum | Mon Jun 07 15:54:56 EDT 2010 | thanh
ECLIPSE-II After calibration, now i'm having an issue that placement between lazer and camera off about .5mm on the Y mount. if parts go to camera, the placement are good. but parts that placing with lazer it off about .5mm at Y for all rotation. do
Electronics Forum | Sat Jun 28 07:33:40 EDT 2008 | proy
Hi We have an Eclipse and Orion Pick and place which we are familiarizing ourselves with. I have lots of feeders, but many that don't seam to act fast enough for the ORION, but I think are OK on the Eclipse. The manuals have pretty good informatio
