Electronics Forum | Wed May 13 10:34:57 EDT 2015 | squeekypigeon
If memory serves me right, if you are test picking a component which will be served to the machine via an LCS the 'pick position' will automatically set itself to feeder slot 1. If you change this to something more central (I used to use location 4
Electronics Forum | Wed May 06 20:52:26 EDT 2015 | arbpkevin
I have been using my topaz X for about 4 years now and I feel that I am fairly knowledgeable about it, at least the functions of it that I use... I am trying to use the LCS to place some qfp chips on a new product and I have set the whole thing up t
Electronics Forum | Wed May 13 12:39:25 EDT 2015 | arbpkevin
Ahh, yes. Just about the same time you replied someone else I asked said the same thing! I didn't realize that you had to put the part on by hand for the vision test. In the book it says to leave the feeder position set to the default setting. Fu
Electronics Forum | Thu Jun 23 20:09:03 EDT 2005 | Stefan
Optimizers for pick and place machines are very specific for the type and model of the machine you are using. A chip-shooter will run at optimal speed with the same type of nozzle and minimal table movement. Most X-Y tables have a faster X-axis than
Electronics Forum | Tue Aug 31 07:51:28 EDT 2004 | dennispoquiz
I used to do optimization on Panasert MV2F/V,Fuji CP6/4,GSM (Universal),Sanyo TCM 3000 with no problem. My problem now is on my old Sanyo V822 SMT chipshooter. I am working on a multi-block (multi-cavity) PCB panel and i cannot, in any way, mount all
Electronics Forum | Fri Jun 05 08:38:22 EDT 1998 | Eric Klaver
The Tesa company delivers Splice Tape for 8mm, 12mm and 16mm. Also special splice tape for 8mm paper tape and some splice tools as well. Siemens uses for large tape a 'staple' but might be patented and then cannot be used outside Siemens. (Staples
Electronics Forum | Mon Jul 01 14:46:47 EDT 2019 | assuredtech
It's been awhile but yes, if you do not allow the machine to optimize your program and your placing sequence is such that the tallest component is perhaps the 1st or last placement so it doesn't bump into other components, next is you may look into a
Electronics Forum | Fri Jan 19 04:12:37 EST 2007 | AR
Hi I know that pump stencil technology can be used to print adhesive on boards with TH components already placed and clinched, but what about solder paste? The production sequence goes like this: First the jumper wires are placed and clinched with
Electronics Forum | Wed Jun 10 19:53:01 EDT 1998 | Joe Herz
| The Tesa company delivers Splice Tape for 8mm, | 12mm and 16mm. Also special splice tape for 8mm | paper tape and some splice tools as well. | Siemens uses for large tape a 'staple' but might | be patented and then cannot be used outside Siemens.
Electronics Forum | Fri Jul 30 04:09:02 EDT 2004 | vinitverma
I would highly recommend Assembleon OpalXII/TopazXII for your low volume high mix applications. You could perform changeovers very quickly. Of course it depends on how many feeders are required per product. If you buy for example, 2 OpalXII machines
