Electronics Forum | Tue Jun 17 10:46:16 EDT 2014 | bestglobalsmt
When the machine loads up it gets to the 2nd to last step where it starts to load vacuum data - we get 4 pop up windows once that fails. Ea2510 Machine Start error - Machine cannot be started Es00212 APPL CPU Haandshake error Ea2504 I/O Data trans
Electronics Forum | Wed Nov 20 15:03:27 EST 2019 | richardcargill
If you've formatted the pcmcia / CF card then it'll be blank and have no DOS or anything as it acts as the hard drive for the machine. A DOS diskette formatted with /S will boot from the floppy drive, then allowing software installation with the orig
Electronics Forum | Mon Jul 18 03:00:24 EDT 2005 | Base
Eclipse/Emerald: Yamaha #88 Orion / Topaz: Yamaha #100 Sapphire: Yamaha #112 Yamaha typically uses the number of usable feeder-positions as their model number. Greets, Base
Electronics Forum | Mon Dec 04 16:10:47 EST 2006 | jasont
Thanks Darby. Are the CSM Orion and Topaz the feeders the same? What are the major differences between Orion and Topaz? Regards, Jason
Electronics Forum | Sat Aug 04 17:46:22 EDT 2001 | Marshall
The YV100X is Phillips TopazX in the U.S. while the YV88 is the Emerald. Now, We find the Juki's 2020 and 2030 more superior than Yamaha's or Philip's because of their flexibility in component handling and the standard features that come with the Juk
Electronics Forum | Thu Nov 30 17:52:10 EST 2006 | jasont
Hi Darby, Orion is the same as Topaz and Yamaga YV100?? What are the differences betwen Orion/Topz? Thanks, Jason
Electronics Forum | Tue Jun 07 16:34:04 EDT 2005 | MrMaint
Been working with philips/yamaha/assembleon equipment for 21 years. I worked at 4 different places, all with this type of equipment. Had nothing but good luck with all the different models, Eclipse,Emerald,Topaz,comet and saphire. Very repeatable and
Electronics Forum | Tue Dec 06 04:30:16 EST 2005 | rlackey
I was under the impression that the Assemblion/Philips Opal/topaz/GEM/Comet etc were all built in the same factory as the Yamaha machines - all except the FCM's. For the record they have very good support - better than Yamaha in some regions such as
Electronics Forum | Tue Feb 01 01:01:19 EST 2011 | jeffr
The YAMAHA manual is not much better. Topaz is slightly harder to calibrate than the later machines due to the machine being fussy about the lighting. Remember that you must setup the QFP68 both in the program for placement and also in the Database f
Electronics Forum | Thu Jun 11 15:49:33 EDT 1998 | Steve
| | In our continued search for another flex machine, we reconsidered Philips | | Emerald (low Vol/high mix Mfg). We already have a CSM so it makes a little sense. Then the salesman started talking about the Topaz. The Topaz supposedly is "practicall
