Electronics Forum | Sun Nov 18 15:04:05 EST 2007 | slthomas
It was apparent to me that because he was looking at a Topaz, not a Topaz X, and a TP, not a My9, that he's looking at older used machines. Is there a used Sony in a similar price range to the other two that will outperform them?
Electronics Forum | Fri Mar 07 04:53:12 EST 2008 | vinitverma
Hi Wayne, First, all Gem machines including Topaz, TopazX, Sapphire, etc... have the same feeders. You can use either FV feeders (which were the ones when Topaz was introduced), or CL feeders (which came when Topaz X was introduced). Both types of f
Electronics Forum | Tue Feb 21 10:11:23 EST 2012 | vinitverma
The top level password allowed for customers is "specialist". All in small letters.
Electronics Forum | Mon Feb 20 15:17:54 EST 2012 | acsscott
Ok, getting further. We have 3 Philips CSM machines, new to the Topaz. Sorry for all the questions. We figured out that you have to press any key during the 6 second delay at power up. It then ask's for the password, or press the escape key to co
Electronics Forum | Tue Feb 21 10:45:45 EST 2012 | acsscott
Thanks for the password. There is a 7 pin connector for the Emergency stop in and out. It has a mate with a jumper wire attached to the Topaz end. If you put the jumpered mating connector on this, the emergency stop errors go away. The other conn
Electronics Forum | Tue Feb 21 10:15:07 EST 2012 | vinitverma
Forgot to mention. To disable the LCS you need to disable it in the machine config - by changing Tray Changer to NONE. Of course for this you will need the password which is "specialist". After setting this in the software, you also need to remove t
Electronics Forum | Fri Mar 17 11:58:09 EST 2006 | derengmao
Could you e-mail me the manual for TOPAZ-X too? Thank you very much.
Electronics Forum | Sat May 11 07:23:41 EDT 2002 | Mladen Alexandrov
Can anyone tell me which machine is better - Philips Topaz X or Samsung CP45FV? The machine is for contract manufacturing services with midium volume, high mix boards.
Electronics Forum | Tue Sep 23 14:18:46 EDT 2008 | slthomas
If you like I can email you a portion of our programming procedure. We also use Cad2Cad, although we have a Topaz, not a Topaz-X.
Electronics Forum | Mon May 13 19:47:37 EDT 2002 | bcceng
Mladen, I am in contract manufacturing using the regular Philips Topaz. I started with one now I have four, if market ramps up will be getting more. The Topaz regular can place 0201,BCC,BGA's,Micro BGA's and others depending on the configuration of
winsouce.jpg)
