Electronics Forum | Thu Jul 07 11:55:03 EDT 2005 | meritajs
Hi, We have problem with ABU IPTE,it indicate Emergency stop, Break,but we can not find all safety switches and sensors because do not have safety drawing. Could somebody help us?
Electronics Forum | Wed May 24 15:55:33 EDT 2023 | davef
Carlo Gavazzi offers a large range of photoelectric sensors [ https://www.gavazzionline.com/CGNA/photoelectric-sensors ]
Electronics Forum | dilogic |
Mon Jun 27 14:27:47 EDT 2011
Electronics Forum | Thu Oct 17 13:31:03 EDT 2024 | poly
Voyager and the uic site has diagrams for the safety systems. There's often interlocks on weird stuff, like for me it was a feeder bank sensor was loose.
Electronics Forum | Wed Jul 09 18:25:32 EDT 2008 | jmelson
There are temperature controllers that can be configured for a "safety stat" mode, so they blow a fuse to the main heater control if it goes, say, 10C or some reasonable fluctuation above the setpoint. It might be a VERY reasonable thing to add to y
Electronics Forum | Fri May 01 15:35:03 EDT 2020 | travishemen
I'm not sure if these are similar to our Genesis machines but if they have removable feeder banks they are part of the safety circuit. If they are not installed or if the sensors on them are misaligned it will show the same as an interlock violation
Electronics Forum | Mon Mar 20 08:50:47 EST 2000 | Dave F
Scott: Pyros don't like to be heated, so soldering should be done as quickly as possible. Other tips are: * Keep pyro leads long. * Apply solder to the ends of leads. * Heatsink the lead, while soldering by holding the lead with a pair of pliers
Electronics Forum | Tue Mar 31 15:14:53 EDT 2009 | kpm135
Is your machine an inline system with the conveyors along the back? If so I have run into this problem before with the sensors on the covers for the conveyors. They are 'magnetic' safety switches that can appear to be closed but don't actually switch
Electronics Forum | Tue Sep 29 09:39:02 EDT 2015 | rgduval
Hey, David, For service, check out 4TechUSA over in Detroit. It's not Chicago, but, you're closer to Detroit up there than I am down here in Houston :) For your issue....do you have access to the UIC Knowledge Base? The first issue I found in the
Electronics Forum | Sat Dec 17 15:46:28 EST 2005 | Csabee
Samsung SM320 don't have sensor for recognizing component. Only using Fly&Fix camera. In first time the korean samsung service engineer advised me (3,7light settings for chips and the machine generated many dumps, sometimes 50 or more per day. But n
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
winsouce.jpg)