Electronics Forum | Tue Aug 05 09:12:34 EDT 2003 | caldon
All of our PNP machine run on UPS back up. Though our machine controller is Dos and failry stable it is integrated with Windows NT who does not like to be prematurley shut down. We get a window of about 4 hours from the UPS. Remember this is just o
Electronics Forum | Sat Jun 12 19:48:47 EDT 2010 | bootstrap
I like what you're doing. 20 years ago anyone, hobbyists and tiny garage-shop companies could create electronics devices just as sophisticated and cool as big corporations. Today, SMT has largely trashed the creativity (and competition) that existe
Electronics Forum | Tue Apr 27 23:10:16 EDT 2010 | mbrunton
I am looking at buying a pick and place machine to assemble the circuit boards we make. Most of the boards are small (2 to 10 square inches), most are 2 sided, and have maybe 20-50 parts per side. I use mostly 0805/0603 chips, SOT-23, SOD-123, SOIC
Electronics Forum | Thu Sep 02 04:59:17 EDT 2010 | sachu_70
Feeder calibration helps to center the window opening used during component pick-up by a machine nozzle. Once this is established, the next step would be to confirm the centering of Machine nozzle to the center of this feeder window during machine op
Electronics Forum | Fri Jul 19 06:52:34 EDT 2013 | deanm
A Quad QSV-1 can do up to 18x24in. You can get these on the used market or buy a completely refurbished (like new) machine from Precision Placement Machines (PPM). I do not represent this company or am in any way affiliated with them, although they d
Electronics Forum | Mon Feb 29 11:58:41 EST 2016 | dustin
When looking at 0402 parts in our old style Europlacer trolleys, the pick up point is in between two part slots. I have heard that there is a manual adjust somewhere on the sides of the trolley that will let you move part into the pick up window. I h
Electronics Forum | Mon Mar 08 11:46:38 EST 1999 | Wendy Casker
| Hello; | | I am looking for general info on backplane assemblies. Any info would be appreciated, but some of the questions that come to mind include: | | -What part types other than connectors do backplane cards have on them? SMT? Leaded? Qua
Electronics Forum | Thu Jan 31 09:07:25 EST 2008 | aj
Hi, we have the same problem here but have a solution. We have Fuji FIP3 machines but this should be the same for all - use the tube that the parts are in for part presentation ! i.e. cut out a window big enough at the top of the tube for the nozzl
Electronics Forum | Thu May 08 09:00:03 EDT 2003 | stefwitt
I like to find out more about your feeder manufacturer. Known problems: If the cover tape peel back is located in the pick up window, the tape may lift the component out of the pocket and when the component falls back it could be inverted. The co
Electronics Forum | Fri Sep 17 16:01:03 EDT 2021 | jamesatqkits
Hi Bukas, Do you have a CP45? I need some help: Ihave no board loaded, the machine is booted and homed. So to pick up a nozzle, I open the ANC window. Click on the nozzle I want, say 29 its a CN065 When I press pick, it asks, machine is not ho