Electronics Forum | Thu Feb 24 11:18:20 EST 2005 | Alex
Many parts falls around the tape cutter no mather the size or type. Also many times the machine misses some picks. But when doing a placement test with a single dummy part, 99% good.
Electronics Forum | Wed Jun 04 18:57:37 EDT 2003 | Rivkin
Hi Guys, How do you calculate throughput? and what's the standard allowance for some hidden downtimes like pick-up miss, pick-up errors, parts/feeder replenishment etc. say i have 4 machines that are not properly balanced in tact time: A= 3 mins
Electronics Forum | Thu Apr 28 08:12:39 EDT 2005 | PL
My company is just starting run 0402 component but the 0402 component giving lot of reject example overturn and pickup miss error so anyone know how to soft this problem Machine Type:-Pansert MV2F 1)machine already inspection 2)already test new f
Electronics Forum | Tue Sep 26 11:05:44 EDT 2006 | slthomas
You might also have a dirty/sticky Z-rod resulting in the same problem, although ordinarily you'll see a lot of missed pickups as well.
Electronics Forum | Thu Apr 28 15:56:44 EDT 2005 | stepheniii
Hopefully it is just the part data a little bit off. But if that doesn't help, make sure the thickness sensor is calibrated bang on. And do the nozzle height adjustment. What are your nozzles and filters like, as far as being clean goes? I've put dow
Electronics Forum | Thu Mar 08 06:57:28 EST 2018 | davidportercpl
I'm struggling to place cylindrical components on the Panasonic AM100, melfs in particular. I have just about goet around the recognition side of things, but pickups are hit and miss, and placements are not very consistent at all. Currently using a 2
Electronics Forum | Thu Nov 17 14:33:02 EST 2011 | olddog
Thanks again Bobpan for all of your help. I hope some of my questions are dumb ones. Regarding "first", the QA error 0, you were right. In checking the setup, for some reason theta was 65227 instead of the 0 that I thought I had set. Regarding "sec
Electronics Forum | Mon Feb 13 17:27:19 EST 2006 | PWH
I have not used one of these jigs. We just make sure and reset feeder B offsets before every build. We've also got good at guessing where a missed pick-up is just by looking at the position of the tape pocket in relation to adjacent feeders and cha
Electronics Forum | Thu Sep 29 05:37:56 EDT 2005 | dougs
for 0402's you should be able to run the turret at full speed, if you need to slow it down it means that your machine isn't set up properly. use the vision number that the manual tells you and make sure your feeders are properly calibrated, poorly c
Electronics Forum | Wed Aug 23 09:27:41 EDT 2017 | dleeper
As Evtimov mentioned, it will be dependent on package. It will also be dependent on the specifics of your machines so there is no universal "good" value. You will need to experiment to find the best values for your equipment and components. I would
