Electronics Forum | Mon Jul 17 14:54:57 EDT 2006 | finalassy
Preheat is a option that we use on almost all boards. We have the pillarhouse jade models.
Electronics Forum | Tue Sep 12 15:31:28 EDT 2006 | billyd
We're using a Pillarhouse for all of our Pb free. JADE I believe is the model. Good little machine, pretty easy to program and maintain.
Electronics Forum | Thu Nov 14 18:51:08 EST 2013 | tombstonesmt
We use a 2mm with our Pillarhouse Jade Mark II. We found that reducing the nitrogen enough that the area around the nozzle stays hot enough not to "freeze".
Electronics Forum | Mon May 01 10:55:21 EDT 2017 | tombstonesmt
This has already been done. Companies like Seho Selective Solder machines can provide this service. I imagine it is not cheap. I'd be curious to compare the drop rate of parts per person per hour on a couple of Pillarhouse Jades vs on custom machine.
Electronics Forum | Thu Dec 19 07:58:40 EST 2019 | apierce
Is anyone out there having issues with the new improved pumps requiring weekly disassembly? Our nitrogen ppm is at 6 pressure is 85 to 95 psi. We replaced and adjusted the nitrogen supply valves. Thanks
Electronics Forum | Thu Jul 13 19:22:01 EDT 2023 | saucyshawn
I have been very happy with Pillarhouse. Exact model for you would depend a lot on batch vs inline. We are using the Jade Prodex.
Electronics Forum | Tue Oct 20 19:26:10 EDT 2009 | fdbittner
I think machine selection depends upon your application (pitch, volume, changeover from pb to pb free etc...) I have experience with ERSA and Pillarhouse Jades. Both very good in their own right. Pillarhouse are relatively cheap, and quick to chan
Electronics Forum | Wed Aug 16 16:53:48 EDT 2006 | finalassy
Hello, we are currently running no clean flux on our Jade model pillarhouse selective solder machine and i would like to switch the flux over to Water Soluable. Are there any concerens with running water soluable on these machines? I have heard tha
Electronics Forum | Thu Oct 15 18:10:53 EDT 2009 | glennandrew
We have recently acquired a Pillarhouse Jade machine which has changeover pots from Pb Free to Pb and the bath it small so changeover heatup is fast . Although it's runtime is slow it seems to run the product well.We are also running an Ebso 400 but
Electronics Forum | Fri Sep 30 07:15:17 EDT 2011 | deanm
We are using Kester 985M in our Pillarhouse Jade. We only run SnPb, but this is a newer formulation of flux that is suitable for both lead and lead free alloys. Call the manufacturer of your selective soldering machine and get their advice. They ty
Global OEM manufacturer of selective wave soldering machines. With a world-wide install base in over 65 countries, we are a global leader in the selective soldering space. Highly customized solutions available in all industries.
Training Provider / Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions
201 N Lively Blvd
Elk Grove Village, IL USA
Phone: 7148533287
