Electronics Forum | Fri Apr 21 14:11:26 EDT 2006 | Dr. Mumtaz Shocker, PhD
engineer at my compny locked me out of the machine for the selective solder. What is the password on ersa?
Electronics Forum | Fri Dec 18 20:27:44 EST 2015 | rowsail
Thanks, I was able to get a PDF of the manual which describes: 1. INSTALL EXTERNAL THERMOCOUPLE PROBE. 2. TURN ON MAIN POWER: a. Press ENTER button b. Press F1 or F2 to scroll to SET UP mode c. Press F3 to select SET UP mode d. Display will read EN
Electronics Forum | Wed May 26 18:54:10 EDT 2004 | Dreamsniper
PILLARHOUSE RUBY, EMERALD atc.
Electronics Forum | Mon May 01 10:55:21 EDT 2017 | tombstonesmt
This has already been done. Companies like Seho Selective Solder machines can provide this service. I imagine it is not cheap. I'd be curious to compare the drop rate of parts per person per hour on a couple of Pillarhouse Jades vs on custom machine.
Electronics Forum | Wed Jun 02 09:10:30 EDT 2004 | dougm
My company is looking at the various options for selective soldering machines. We are mostly a low volume, high mix facility, with some moderate volume orders as well. I have looked at the Pillarhouse Topaz XL, Ersa Versaflow, and Vitronics Soltec
Electronics Forum | Fri Apr 27 17:51:26 EDT 2007 | chrisgriffin
It appears a disgruntled employee has sabatoged my Sapphire solective solder. Along with cut ribbon cables, I think some jumpers were removed from the system board. D.O.M: '98. I was hoping that some nice person could take a picture of the system b
Electronics Forum | Mon Jul 17 14:54:57 EDT 2006 | finalassy
Preheat is a option that we use on almost all boards. We have the pillarhouse jade models.
Electronics Forum | Tue Dec 11 12:29:57 EST 2012 | deanm
Thanks for the comments so far. The smallest nozzle I've tried is a 4mm, which is what Pillarhouse used on this board to provide a sample. I tried this but wasn't as good as the 6mm. I've soldered the same connectors on a different board using a 10mm
Electronics Forum | Thu Dec 06 12:37:14 EST 2012 | deanm
We are having difficulty with bridging on a 2x50 pin 0.050" fine pitch connector using our selective soldering machine. It usually bridges at the end of the row, but sometimes it bridges all the pins together as it drags across (solid bridging). I
Electronics Forum | Wed Jan 25 08:42:16 EST 2023 | poly
I'm mostly thinking of a Juki or a Pillarhouse, is the Juki decent? The one I'm looking at is relabelled, isn't actually Juki made.