Electronics Forum | Wed Jul 04 16:40:56 EDT 2012 | comatose
We use a lot of single row breakaway pin headers. Right now we order then as sticks of 36 and I just have a tech break them into whatever lengths we need (3 pin, 5 pin, 8 pin, whatever.) I'm trying to streamline our auxillary processes. I know you ca
Electronics Forum | Thu Nov 07 21:28:31 EST 2019 | sssamw
The connector is so long, and has big metal parts, it will be little deformed during reflow I guess, andthe pins planarity should be critical for 200 pins. Did you measure the non wetting pins profile to see if temperature ok? And maybe you can try u
Electronics Forum | Tue Apr 19 10:19:28 EDT 2011 | leemeyer
We currently have a job that uses press fit solderless pins. The pins are custom and only supplied in bulk packaging. I am looking for a machine that can orient the pins and present them to my insertion machine. Of course i need the pin to be present
Electronics Forum | Fri Jul 23 06:44:33 EDT 1999 | George Verboven
| First of all, I'm a young Spanish so sorry for my English | | I'm looking for a smd single pin connector. I need it to solder it in a alumina's substrate. | | Please. can anybody help me ? | Go to the following adress: http://www.keyelco.com/ke
Electronics Forum | Thu Nov 07 10:07:02 EST 2019 | charliedci
Requesting help from anyone with experience in reflowing Te Connect, PN 1565917-4, 200 pin connecter. Pic attached. Cannot get all 200 pins to wet, main suspect is slight PCB warping during reflow. Have adjusted reflow profile. A 2.75 inch long SMT c
Electronics Forum | Tue Jul 20 06:36:24 EDT 1999 | Badia
First of all, I'm a young Spanish so sorry for my English I'm looking for a smd single pin connector. I need it to solder it in a alumina's substrate. Please. can anybody help me ?
Electronics Forum | Mon Jul 26 13:39:26 EDT 1999 | Badia
Despite the goodness of Dave F. and George Verboven, I was unable to find the damned single pin connector. As a last attempt, I've draw it (see the link) If somebody knows where can buy it, please help me (and sorry for to ruin the English language
Electronics Forum | Tue Sep 01 11:46:09 EDT 2009 | andoe
when the cp6 loads a board everything seems normal / as the table drops the pcb lines up onto the origan hole and then instantly fails with -- "original pin error" we have run this board before. any ideas? thanks
Electronics Forum | Tue Sep 14 17:06:25 EDT 2010 | asksmt
Hi All, I have designed 4 Layer PCB with one 28 pin QFN PKG. I have got complaint from Production that the pads which connected to thermal pads (gnd) thru trace is bridging with solder and because of this bridge, pins are not getting soldered prope
Electronics Forum | Fri Nov 08 05:40:54 EST 2019 | leeg
We place these on a few boards and have no issues with reflow or warpage. How thick is your PCB?
