Electronics Forum | Wed Jul 30 13:02:56 EDT 2014 | proy
Through hole headers in long strips Anybody know of a tool/manual punch and separate these instead of sidecutters very slow....
Electronics Forum | Thu Jul 31 14:52:38 EDT 2014 | rgduval
As I understand it, customized equipment for breaking the headers out can get fairly expensive. I've used two methods to do these, other than using cutters. First, we bought a bandsaw to use for cutting. The only disadvantage to using the bandsaw
Electronics Forum | Thu Oct 28 15:12:45 EDT 2021 | ttheis
Down-size or stagger the pin holes to "grab" the pins and hold them in place.
Electronics Forum | Thu Oct 28 19:56:39 EDT 2021 | stephendo
Or press fit. But he said he can't change the pins or the board.
Electronics Forum | Fri Oct 29 03:13:21 EDT 2021 | ttheis
Then adhesive or a pallet to support the header are the only other options.
Electronics Forum | Wed Oct 20 14:34:29 EDT 2021 | korb23
1 1 I work for a small company as an apprentice. We build mostly mass produce double sided PCBs. We are having trouble keeping the pin headers flat to the PCB through the reflow oven process. The first side is pasted through a printer and populate
Electronics Forum | Wed Oct 27 11:50:36 EDT 2021 | proceng1
I'm not clear on your current process. You run FIRST SIDE. Then paste and build SECOND SIDE. Then you insert a header from the FIRST SIDE so the pins solder with paste on the SECOND side. And you run the board with the unsoldered header on the bot
Electronics Forum | Thu Oct 21 13:14:43 EDT 2021 | majdi4
Could you provide us with more informations about this issue ( Picture of the board with components , the deffect component , DATAsheet ..) it may help us to more understand your problem and look forward to a solution ..
Electronics Forum | Thu Oct 21 15:53:00 EDT 2021 | jdengler
Why is your customer controlling your process? You should be the expert on your processes. As long as the components that are on your second side would stay if they were processed as the first side this would be an acceptable solution to your issue
Electronics Forum | Mon Dec 27 19:14:07 EST 2021 | ppcbs
Use Loctite Chipbonder. https://www.jensentools.com/loctite-235130-chipbonder-10-ml-std-syringe/p/411-620
winsouce.jpg)
