Electronics Forum | Tue May 22 10:33:36 EDT 2012 | swag
In my opinion, the best solution is h-towers or similar dedicated tooling designed for each build. However, a quick cheap fix is to make templates to lay in the bottom of the centernest. If you have access to CAD software, you can print out the ger
Electronics Forum | Wed Jul 30 13:02:56 EDT 2014 | proy
Through hole headers in long strips Anybody know of a tool/manual punch and separate these instead of sidecutters very slow....
Electronics Forum | Tue Aug 04 12:12:04 EDT 1998 | Steve A
| We are looking for source(s) for tooling pins: | 1 Stainless steel pin | 2 0.120" diameter, 0.250-0.375" long | 3 Press fit We have been buying .122" dia SS tooling pins from Danley Punchrite. Their number is 1-800-232-6592. The problem is tha
Electronics Forum | Tue Oct 07 03:03:06 EDT 2008 | rafacadiz
We had the same problem last year. You need verify these key points. 1- Holes are drill, NOT PUNCH. 2- Inspect 100 Boards at microscope, and verify that there is not rest of fibers in the holes. 3- Meassure the dimensions of the holes. a) virgi
Electronics Forum | Fri May 24 11:49:55 EDT 2002 | stefwitt
Again, I would like to refer to the tape dimensions and their deviations. In an 8 mm tape the distance from the sprocket holes to the tape pocket is 3.5 mm +/- 0.05 mm. This tolerance is easy to achieve, because in the manufacturing process of the ta
| 1 |
