Electronics Forum | Sun Jan 17 13:05:33 EST 2010 | smellew
Rodrigo, MCS PC Pin 1 To Pin 2 Pin 4 To Pin 5 pin 6 To Pin 3 Local Links MCS 9 Way Male Link 2 & 8, 3 & 7 PC 9 Way Female Link 7 & 1, 4,6 & 8 If you need anything else let me know Regards Llew
Electronics Forum | Wed Jul 20 13:28:02 EDT 2005 | Theo Doucakis
I am looking for some guidance on the proper pin to hole ratio for waved pins. Theo
Electronics Forum | Thu Oct 28 15:12:45 EDT 2021 | ttheis
Down-size or stagger the pin holes to "grab" the pins and hold them in place.
Electronics Forum | Mon Jun 18 01:23:07 EDT 2001 | gregH
I have a 10-pin single in line connector that is reflowable. Pin size is 1.0mm and my pcb drill size diameter for the pin is 1.5mm. is it okay for pin in hole process ? I have only 2 pcs of pth components and they are the 2 10 SIL connectors. What's
Electronics Forum | Mon Oct 12 15:51:47 EDT 2015 | davef
IPC-A-610E-2010, Acceptability of Electronic Assemblies, 8.3.4 Castellated Terminations talks to the acceptability of solder connections on components like yours. It’s tough to say from the pictures, but I’d say your issues are: Missing solder: Plat
Electronics Forum | Tue Sep 24 14:38:53 EDT 2002 | Jim M.
The EMS company i work for assembles a small PCB board that requires 10 solid press fit pins installed. The pins are Phosphor Bronze, CDA-510 Alloy, Grade A, 3/4 hard with a finish of .00012 min tin/lead over .00005 min nickel.I would like these pla
Electronics Forum | Thu Feb 10 08:25:02 EST 2005 | marakas
Could anyone advise what BGA rework rate we should expect with product that has 4 BGAs (224 pins, 196 pins, 160 pins, 48 pins). Negative factor is that we have old and tired pick & place - Panasonic MPA-G1 or MPA-V without AOI.
Electronics Forum | Fri Jan 15 18:05:54 EST 2010 | rodrigo
Hi all, I'm looking for the cable pin-out to connect a PC serial port (9-pin) to an MCS30 serial port (9-pin). Can anyone help? Thanks
Electronics Forum | Wed Feb 11 21:21:51 EST 2015 | cmchoue
Does anyone know "fish eye" Pin that had any advantage? Why use pin like this?What difference with normal SMD pin? Thanks!
Electronics Forum | Thu Mar 18 10:09:57 EST 1999 | Stefan Witte
| My engineering Dept. has informed me that they want | to start using pins, on an aluminum substrate in the | smt process. Pins are interconnect for daughter bds. | Dia. of pins 0.020" 0.040" 0.080" flat bottoms | 1) Does any one know how to
