Electronics Forum | Thu Jun 13 09:28:40 EDT 2019 | dogsbody
Would you still have the pinout you were sent for the Samsung feeders. Kind Regards Andrew
Electronics Forum | Thu Oct 11 10:48:50 EDT 2018 | dnachristen
Anyone?
Electronics Forum | Thu Jun 13 09:51:06 EDT 2019 | dnachristen
I do, here you go.
Electronics Forum | Wed Oct 10 09:55:33 EDT 2018 | dnachristen
Hello! I have a calibration jig that handles both Philips / Assembleon and Samsung feeders. I have a power supply hooked up for the Samsung feeders, but would like to know if anyone has the pinout for those feeders so I can rig some kind of electroni
Electronics Forum | Fri Oct 26 09:43:19 EDT 2018 | dnachristen
Hello! A member here graciously sent me the pinout I needed. I now have 24v to the feeder in the test rig, but need to know what type of signal the feeder requires on pin 9 to electronically index. Anyone have a clue? I tried ground signal and 24v, n
Electronics Forum | Fri Oct 26 19:53:48 EDT 2018 | sarason
Suck it and see, start at a 3V pulse, then a 5V pulse, then a 12V pulse, time is not likely to be that critical but a few milliseconds should do! sarason
Electronics Forum | Wed Jul 08 23:07:18 EDT 2020 | tylerrobertson
Hello, Trying to re-purpose a QUAD feeder for delivering small parts to a scada robot. Wondering if someone could help me out with a pinout for the connector. it's 8 pins Feeder is p/n 12/10-23959B SSA Was able to get the board to power up and flas
Electronics Forum | Wed Mar 04 07:57:15 EST 2020 | truongnguyen
i have fuji feeders w24c. I want to use PLC to control feeder. I don't know the pinout of the 14-pin jack. Please help me!!!
Electronics Forum | Thu Jul 09 15:58:50 EDT 2020 | tylerrobertson
Bob you like beer? I'll send you a beer.. what's the IQ function, just feedback from the sensors/switches on the feeder?
Electronics Forum | Thu Jul 09 16:07:22 EDT 2020 | bobpan
I love beer...haha IQ is communication between the feeder and machine to let the software know that the machine is picking the correct part. If you need further help....you can email me at www.precision-repairs.com
