Electronics Forum | Tue Aug 10 06:58:48 EDT 2004 | dka123
dear all, kindly guide me for the use of space electronics hardware assembky of PQFPs and Cqfps, how to form the flat pack leads, bend for 240 pins of 20 mil pitch and what are the Mil standards for them.how to cut the lead guards.can we use FP5 elit
Electronics Forum | Thu Sep 02 05:12:15 EDT 2004 | doi
I am using a triad connector and have problem with wetting at both connector latches.Observed that the leads have very good shiny wetting however concerning the latches the solder just seem to disappear to thin airafter reflow.The connector has a gui
Electronics Forum | Tue Sep 14 08:14:07 EDT 2004 | Rob
Hi, There are "Fluxbuster" or "Rotator" pins on the market - we had to use them a few years ago on a flexy board (with OSP). There is some info from one source at the following link: http://www.isiconnectors.com/mfrs/idi/idipr.htm#Rotator We got
Electronics Forum | Fri Oct 01 13:14:10 EDT 2004 | dorklover664
The MPM's are the Yugo's. You can fix anything on it with duck tape and a rubber band. I would go with the DEK. They are user friendly and reliable. Just make sure that if you are running double-sided boards to look into good push-up pins. They have
Electronics Forum | Mon Oct 11 06:22:54 EDT 2004 | C Lampron
Jim, I also do not have any practical expeince at this time with the LF. I can only imagine that the reduced spread/flow of the LF would make the process window for intrusive reflow that much smaller. I think that things like pin to hole ratio and h
Electronics Forum | Wed Oct 13 05:46:27 EDT 2004 | apetkov
Hi Do you know about some kind of database (library) with physical specifications of the most widely distributed SMD Components. Something like BGA, QFP, SOP, etc. and for each corpus width, length, pins, etc. JEDEC has something similar, but t
Electronics Forum | Fri Nov 12 06:38:43 EST 2004 | clampron
Good Morning, I feel that the Grid Lock system (with stealth mode) is the best system for absolute support. For us, it came down to spending 5K or 30K. We went with the 5K. The system we got is not perfect but serves our needs. The Grid lock resets h
Electronics Forum | Wed Nov 24 05:57:31 EST 2004 | chad
If you're using tooling pins, you may check to see that they do not have wear on the sides from boards repeatedly rubbing against them. I have seen this problem several times, you may give it a look. If you're not using them, I'd suggest that you gi
Electronics Forum | Fri Feb 04 09:35:45 EST 2005 | glaucon
The base model UP3000 is really a general designation for the platform. The use of "UP3030" designated the configuration of the machine from the factory. The UP3030 (if memory serves me) came with 2D, a vacuum stencil wiper, and a paste dispenser. I
Electronics Forum | Sun Mar 06 11:04:19 EST 2005 | jsk
Slot three will not recognize magazine. LED's are lit (green)when inserted into slot three. Magazine works in all other slots. Tried multiple magazines. All gave the same error. Error code = E-MIPR-1 unknown magazine type slot 3 No visible damage t
