Electronics Forum | Mon Jul 26 12:55:34 EDT 1999 | M.L
Presently protos of micro-bgas (80i/o) pitch .030/.031 12BGA per assembly The board is a (.062, 4 layers) FR-4 using Dry film Pads .014inch Vias within footprint .020inch Vias to be filled by bottom side(solder side) only .030in dia. Force via plugg
Electronics Forum | Thu Jul 22 14:42:21 EDT 1999 | Bill Schreiber
Dear Jason, Smart Sonic has over 500 stencil cleaners in operation around the world. The Smart Sonic Stencil Cleaning Process is the only cleaning process that is Certified Environmentally Safe by the Environmental Protection Agency (EPA) and verifi
Electronics Forum | Fri Jul 09 19:35:05 EDT 1999 | Earl Moon
| Hi Carol- | What you are asking for can be done. Variables you must account for include the paste viscosity, dispensing head speed, dispenser height relative to board surface, and needle size. You can use most any semi-automated system such as Ca
Electronics Forum | Fri Jul 09 11:28:24 EDT 1999 | Earl Moon
| Has anybody successfully used an automated dispensing system to put solder paste dots on .5 mm pitch pads?? I need to replace some Meritec tsop sockets and I don't want to use the single site stencils for .5 mm parts. | Carol, Don't blame you f
Electronics Forum | Sat Jul 10 00:57:17 EDT 1999 | Scott
| who can tell me how viscosity measurements are really effective in smt process control? what can I monitor? Is it depending from fine pitch size? | Thanks a lot. | g. d'andrea | The last place I worked used a viscosity meter, funny how little was
Electronics Forum | Thu Jun 24 09:57:44 EDT 1999 | Vic Lau
Dear guys, I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now using a no
Electronics Forum | Thu Jun 24 10:11:33 EDT 1999 | Dave F
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Thu Jun 24 16:19:46 EDT 1999 | Kennyv
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
Electronics Forum | Thu Jun 24 16:23:18 EDT 1999 | Kennyv
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Wed Jun 23 11:02:09 EDT 1999 | John Thorup
| | We are reflowing boards that have glop top components | mounted on them. Do glop tops have the same moisture | sensitivity as fine pitch? Should we be baking the boards | prior to reflow? | |If your glob tops are PBGAs, they are likely very mo
