Electronics Forum | Fri Aug 12 20:23:26 EDT 2005 | dorklover664
Is it possible to advance the feeder at shorter intervals? So every time the part is picked the feeder moves 2 times shorter movements instead of one long move? Just a thought.
Electronics Forum | Tue Aug 02 11:17:27 EDT 2005 | Stefan
Tape feeders usually have a fixed pick position regardless of the package size. Is the component body off center in the tape pocket? I hope you can enter an offset in the feeder set up file. Also, perforation holes can deform, if the reel is too hea
Electronics Forum | Fri Dec 15 02:32:12 EST 2000 | PeteC
Ian, The vision should recognize it; given you've got the correct Part Data. To run 0402 effectively with a CP3 you need: 1. A good, I mean real good, CP4 style feeder for 0402 (1005) 2. 0.7mm nozzles (get from second-source supplier such as WT in
Electronics Forum | Fri Dec 15 05:02:42 EST 2000 | SaiWong
It is not gonna work. Even though you fine tuned the CP3. 0603 is the maximum. The camera design is only for the 0603 maximum. If you use it for 0402. I think at least 60% of the component are gone. Also, there is no 0802 feeder for the CP3. How can
Electronics Forum | Thu Jul 28 03:49:06 EDT 2005 | aj
Are you seeing many of the components in the reject bin of the machine? If it is feeder related I would expect to see some rejects unless the part is jumping and landing in the same orientation i.e. 3 leads on same side everytime! Other than that I
Electronics Forum | Mon Aug 01 17:54:02 EDT 2005 | Stefan
If you are using vib. feeders than the component may be flipped length wise by the following components. Components should be landing with the leads on the right side but upside down. If you are using tape feeders the component may be flipped sideway
Electronics Forum | Tue Aug 02 22:44:42 EDT 2005 | crishan
Thanks for the comments everyone. I did not think of checking the nozzles material, I will check this out. GS, What is PBM, is this some sort of ironiser. Also to clarify, we believe the that the pocket size for the component is too big allowing th
Electronics Forum | Wed Aug 03 10:01:39 EDT 2005 | GS
Hi Crishan, sorry, "pbm" is a short way to say problem. In the past ('89), we had same magnetic pbm also with metal nozlles on Dynaper MPS-2500. Some time, we found also chips received from supllier already magnetized. Solution was to put the r
Electronics Forum | Wed Aug 03 21:00:12 EDT 2005 | rcarlos28
Crishan, Do you check the Nozzle orientation? some machine use a Rectangular o circle nozzle body, and this reduce the vaccum. When this component is taked from the feeder and the camara measured recognized the pins? Do you change the type of rec
Electronics Forum | Thu Aug 04 11:31:45 EDT 2005 | lloyd
I'm not overly familiar with the Pana machines but I recently had the same issue with a SOT23. We have an option on our machines to switch on an early vacuum on pickup and it was this that was causing the problem. I'm not overly sure how it caused th
