Electronics Forum | Wed Jun 22 22:48:46 EDT 2011 | tony_d
Hello NHTech, When it came time to invest in AOI, my team and I checked out several machines. We run a wide variety of products and our changeover is high, on the order of five to ten jobs per day. MVP is one of the machines that we looked at, how
Electronics Forum | Wed Jun 15 22:27:40 EDT 2011 | pkamath2
Hello, My company recently installed a Positive Displacement Pump on a GSM Pick @ Place machine for dispensing chipbonder (loctite 3621) dots before mounting chip components. The head uses Universal stand nozzles (single port-small dot, dual port 0
Electronics Forum | Tue Aug 16 19:03:26 EDT 2011 | rsikora
Hi, I have a faulty intermec printer CPU > board. > > I'm probably in the wrong place but if > anyone can give me some help, I would really > appreciate it. > > I manage to connect an > incorrect thermal printhead to the printer and I > think
Electronics Forum | Mon Oct 10 08:26:08 EDT 2011 | martinouk
We have two YesTek AOI systems, and the reason we have two is because of the quality of performance and the support we received on the first system. The YesTek systems are good...but let me share this experinece with you 'fishingfool'. We bought a
Electronics Forum | Mon Oct 10 08:28:06 EDT 2011 | martinouk
We have two YesTek AOI systems, and the reason we have two is because of the quality of performance and the support we received on the first system. The YesTek systems are good...but let me share this experinece with you 'fishingfool'. We bought a
Electronics Forum | Thu Nov 17 14:33:02 EST 2011 | olddog
Thanks again Bobpan for all of your help. I hope some of my questions are dumb ones. Regarding "first", the QA error 0, you were right. In checking the setup, for some reason theta was 65227 instead of the 0 that I thought I had set. Regarding "sec
Electronics Forum | Thu Nov 17 15:57:41 EST 2011 | olddog
Hi Bobpan, Regarding "second", the results of the test are no difference - still rejects the part. I tried 2 mils, 3 mils, 5 mils, 7 & 9. I changed the tolerances fron about 15% to 20%+. By the way, I did put on the new nozzle and it is still the sa
Electronics Forum | Fri Nov 18 12:32:56 EST 2011 | gosswald
I have a Quad 2C I have been in the process of setting up. Currently everything seems to be working on the unit but I am having some vision inspection problems with it. The vision system does comes on line and seems to work correctly. I have one bo
Electronics Forum | Fri Dec 09 15:10:55 EST 2011 | davef
Can you use the equipment manual as the basis for learning how to use the machine? Each model of printer has different alignment techniques. We don't have a clue of your model type. So, we'll approach the question from its most basic point. Registe
Electronics Forum | Tue Jan 17 23:25:55 EST 2012 | ngineer
I think I've got it. 1. Black flat connectors are for the nozzle changers, and whether or not the tab is pushed in or out (depending on whether they are placed in front of one of the blocks on the feeder base doesn't matter at all, the blocks are th
