Electronics Forum | Thu Dec 04 10:26:06 EST 2008 | billmeye
Is anyone aware of any white papers regarding the possibility of lead contamination on ROHS assemblies from using the same test fixture with the same test probes on both tin/lead and ROHS assemblies. We have customers switching over but we are still
Electronics Forum | Tue Aug 19 03:20:39 EDT 2008 | dlocampo
Basically, Brushing the pogo pins with dry anti-static brush will help but, cleaning it using solvents is not that advisable because it only leaves some residue that will further cause contact problems. Looking at the picture it seems that the UUT's
Electronics Forum | Wed Sep 08 13:22:41 EDT 2021 | davef
Many pogo pins have a plating that may not solder well. The plating is intended to limit corrosion on the pogo pin from soldering flux. Back in the old days, they used gold. I have no idea of what they use now.
Electronics Forum | Wed Aug 13 00:09:27 EDT 2008 | diesel_1t
Hi there. We have had troubles with pogo contamination on ICT fixtures causing false failures (Pictures attached). Currently we're spending about 10k on pogo replacement but still having problems. I recomended to clean pogos with a defluxer but Test
Electronics Forum | Fri Aug 08 11:39:33 EDT 2008 | ethancw1sel
Thanks for your input. I too thought the pogo pins would be the main issue. But we've been running with ours for about 6 months, and we've not replaced one pogo pin block. But we've replaced 4 or 5 various sensors. The PSV and Tension sensors are
Electronics Forum | Tue Sep 07 10:24:49 EDT 2021 | leeg
Has anyone had much experience of using the "POGO" (Spring Loaded pins during SMT? If so what issues did they encounter initally?
Electronics Forum | Tue May 26 00:22:35 EDT 2015 | hemantp
help required for understanding correct nozzle for the fuji feeder ( CP642 or QP242 )mounting of the SMT Pogo pins ( single Pin ) The Part nos are 1. P/N : HCS0712SM01-B20150507 (Female pin) and 2. P/N : N005M1-01C000CR (Male pin).
Electronics Forum | Tue Aug 01 10:19:34 EDT 2023 | leeg
Did you have a recess for the pin to sit in or is it one with the full PTH?
Electronics Forum | Tue Sep 07 16:49:49 EDT 2021 | davef
Talk to us more about your application. Are you talking about ICT test head fixturing or adding pogos to the board during assembly? Or ...
