Electronics Forum | Thu May 21 23:18:22 EDT 2020 | gabriel1blue
After the closing down for a few weeks we encountered a problem with our old pick and place machine. It reset to Japanese but we were able to change it back to English. Not when we start the machine and try to get it back to origin we get a counter o
Electronics Forum | Wed Sep 03 15:18:12 EDT 2014 | chemers
I am looking for some help for where to look to fix this MY12 problem. We started the machine after the weekend and this error code comes up during initialization. F-MOT-MSETDYN X/12: Position counter dead MyData tells us our only option is to have
Electronics Forum | Tue Sep 09 17:09:44 EDT 2014 | chemers
Thank you to all. The problem was dust in the x wagon motor. We cleaned the motor out and everything works again. Rebecca
Electronics Forum | Fri Sep 05 09:42:41 EDT 2014 | cflames17
If you call service they can also walk you through the motor test. Ask for Glen. Al no longer works for MYDATA.
Electronics Forum | Mon Sep 08 09:04:41 EDT 2014 | chemers
Steve. It would be great if you could talk me through this independent motor test. Is there a good time to call? Thanks. Rebecca
Electronics Forum | Mon Sep 08 09:34:32 EDT 2014 | cflames17
Anytime before 1pm eastern time today should be good. we have Mycronic installing New My200's this week. He is do to arrive sometime after 1pm. I will be glad to be of assistance.
Electronics Forum | Thu Sep 11 17:18:13 EDT 2014 | tech1
You may want to check the brushes in that motor, could very well be the "dust" that you have seen.
Electronics Forum | Thu Sep 11 17:23:05 EDT 2014 | chemers
The brushes are terribly worn, but we put them back in until we got new ones. We have them and will be replacing tomorrow. Thanks.
Electronics Forum | Fri Sep 05 09:56:58 EDT 2014 | island2013
Both Steve and Rob are on the right track in troubleshooting the error. We've received a fair number of machines that have had similar issues. The motors are independent and both go back to the MOT card of which we have repaired. Let us know if we
Electronics Forum | Wed Feb 19 09:52:45 EST 2014 | brendansales
Dear Rob, Got to the maintenance menu, under the Motor section, I selected Z motor and tried to initiate motor, there was no movement on the machine and I had the error message as below: F-MOT-MSETDYN Z/12: Position counter dead I suspect that ser
winsouce.jpg)
