Electronics Forum | Tue Jan 23 15:28:58 EST 2024 | triplettx3
contact Mike Forseen at SMT research he is very knowlegable on all the older Fuji machines, i have alot of spare parts if you ever run into a jam.
Electronics Forum | Thu Jan 11 19:18:24 EST 2024 | madisreivik
Hello ! FUJI IP3 left head sometimes places component with rotation error. Vision processing SHOWS that component needs rotation Mechanical side is checked, looks fine. Also, changed servo, no effect. It happens randomly, maybe 1 part from 30. It
Electronics Forum | Fri Jan 12 15:32:53 EST 2024 | madisreivik
Indeed I found some vacuum problems, one replaced small hose was not fitted correctly. Lets see if that helps :) Great thanks ! Also, Travis, do you have any information how to adjust the milk-plexiglass slitted covers on line scan cameras ?
Electronics Forum | Thu Jan 11 19:52:55 EST 2024 | travishemen
Check the top of the placing head. There are 3 screws around a piece that pops up when you push up on the nozzle. I had one once that was vibrating and causing the part to place slightly off angle. It is exposed to the vacuum used to pick the part
Electronics Forum | Tue Jul 10 08:59:07 EDT 2012 | zrunkle_api
First post here. the company I work for has to CP4 and the newer of the two is given us a Q4 Rotation Error. Anyone have any idea what this is and what is causing it?
Electronics Forum | Wed Jul 11 12:34:10 EDT 2012 | zrunkle_api
Thanks for the help. I will lock into that. The weird thing is if we let the machine sit for like 30 mins it will run again for like 30 mins to an hour and then give the Q4 Rotation error.
Electronics Forum | Wed Jul 11 12:35:01 EDT 2012 | zrunkle_api
Thanks for the help. I will lock into that. The weird thing is if we let the machine sit for like 30 mins it will run again for like 30 mins to an hour and then give the Q4 Rotation error.
Electronics Forum | Wed Jul 11 12:10:06 EDT 2012 | cyber_wolf
Q is theta related.
Electronics Forum | Wed Jul 11 12:49:49 EDT 2012 | cyber_wolf
There is probably a component stuck in the theta gears or it needs PM'ed
Electronics Forum | Fri Jan 05 18:39:49 EST 2024 | madisreivik
Also, sometimes placing heads "skip" some rotation - component is little skewed on board but vision shows "correct" numbers. Probably some mechanical error ?
