Electronics Forum | Thu Feb 10 10:49:26 EST 2000 | Sal
The connectors are well within thier specification,and are also checked for misaligned and damaged pins , as regards the cross-section results, all holes are correctly aligned and are well spaced within their tolerance of +/-0.005 (a couple of isolat
Electronics Forum | Fri Oct 26 06:25:56 EDT 2001 | John
Undertaking tricky rework project to remove two BGA's in close proximity to two press fit dip sockets any guideline sone should use??? proceddure ,process control etc
Electronics Forum | Wed Jan 06 23:49:48 EST 1999 | Chris G.
| Hey All you Einsteins out there!! | | I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket
Electronics Forum | Tue Feb 02 10:12:50 EST 1999 | Justin Medernach
| Does anyone have any reliability data /concern on pressfit rework/repair - is there any qualified /characterized equipment /tools present in the industry? | What kind of effect does it have on barrel plating quality (1.5mil avg.) after 1 time rewor
Electronics Forum | Wed May 16 14:09:22 EDT 2001 | davef
First thing I'd use is IPC-A-610C, �4.8.2 Connector Pins - Press-Fit Pins. Does it work in your case?
Electronics Forum | Thu Oct 28 19:56:39 EDT 2021 | stephendo
Or press fit. But he said he can't change the pins or the board.
Electronics Forum | Mon Jan 22 09:35:34 EST 2007 | saaitk
Check that your boards haven't been over plated. Too much plating in the hole can slump to the underside of the board during reflow. If you are then press fitting on the underside of the board you can have problems with hole diameter. If the hole is
Electronics Forum | Thu Feb 27 17:24:34 EST 2003 | pauld
Forgive the non-SMT question. That's why I hate through hole boards. Has anyone ever used Bareco wax on pressfit connectors, and how do you produce a consistent process for its application? Any drawbacks? Background: We have found a design issue with
Electronics Forum | Thu Feb 08 21:30:56 EST 2007 | Bill
Yes, many thanks for your reply.
Electronics Forum | Tue Aug 04 08:29:06 EDT 1998 | Dave F
We are looking for source(s) for tooling pins: 1 Stainless steel pin 2 0.120" diameter, 0.250-0.375" long 3 Press fit