Electronics Forum | Thu Sep 03 01:34:24 EDT 1998 | John Kirby
| | Could someone please help me. We clean our PCB's with Safewash at present. As most of our work has to be upto MIL-STD, we cannot clean the PCB when transformers are fitted? Could someone please help???? | | Thank you | | J Kirby | J, | You have
Electronics Forum | Tue Sep 01 23:13:22 EDT 1998 | MIKE
| | Could someone please help me. We clean our PCB's with Safewash at present. As most of our work has to be upto MIL-STD, we cannot clean the PCB when transformers are fitted? Could someone please help???? | | Thank you | | J Kirby | J, | You have
Electronics Forum | Wed Jan 06 23:49:48 EST 1999 | Chris G.
| Hey All you Einsteins out there!! | | I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket
Electronics Forum | Wed Jan 24 16:37:58 EST 2007 | MelS.
Does anyone know of facilities that just perform rework? I am in need of reworking approximately 1,000 panels in the greater Philadelphia area. (two components - one press fit connector, one a samll cap) Any input/advice would be helpful.
Electronics Forum | Mon Jan 22 03:51:16 EST 2007 | Bing
We are using HASL board for Press Fit, without problem in the past until recently. Now we are seeing the solder in the PTH melt and block partially the PTH hole during the reflow. It gives problem when Press Fit. Anyone has advice on this?
Electronics Forum | Wed Aug 31 15:25:05 EDT 2005 | lyrtech
Hi, Does anyone knoews a place where i can find a used presse to place press-fit connector? Only a couple of company are distributing this item. I want a used one for cost reason. Regards
Electronics Forum | Tue May 06 22:15:06 EDT 2008 | davef
We agree. We consider mounting holes and press fgit socket pads to be "critical contact areas." Consider taking steps to prevent the production of such solder splats on your gold to help elimate gold rework. We discussed this previously here on SMTn
Electronics Forum | Tue Feb 02 10:12:50 EST 1999 | Justin Medernach
| Does anyone have any reliability data /concern on pressfit rework/repair - is there any qualified /characterized equipment /tools present in the industry? | What kind of effect does it have on barrel plating quality (1.5mil avg.) after 1 time rewor
Electronics Forum | Mon Jan 22 09:35:34 EST 2007 | saaitk
Check that your boards haven't been over plated. Too much plating in the hole can slump to the underside of the board during reflow. If you are then press fitting on the underside of the board you can have problems with hole diameter. If the hole is
Electronics Forum | Fri Oct 11 17:19:23 EDT 2002 | peterson
The ASG (Tyco) MEP (Manual Electric Press) or the AEP (Automatic Electric Press) are both excellent machines, we have used them successfully on all types of press fit connectors. Give Dante Parenti a call and he can help you out. (215) 784 4530 Or g
