Electronics Forum | Mon Mar 08 11:46:38 EST 1999 | Wendy Casker
| Hello; | | I am looking for general info on backplane assemblies. Any info would be appreciated, but some of the questions that come to mind include: | | -What part types other than connectors do backplane cards have on them? SMT? Leaded? Qua
Electronics Forum | Thu Sep 01 00:52:24 EDT 2005 | adlsmt
Depending on the connector you should be able to use a standard cheap arbor press with some cheap home-made tooling. Standard arbor presses typically have a rotating disc with cut-outs, remove this and put a decent quality stainless steel block in it
Electronics Forum | Tue Nov 07 11:14:11 EST 2000 | Adam
There is a variation on the pins that come through on the other side. The pins that are deforming are roughly half the size of those which aren't deformed.There are no witness marks on the pins that are deformed, suggesting that the pins aren't fouli
Electronics Forum | Mon Dec 20 17:34:17 EST 1999 | Dave F
Ron: Chris is correct that there is a bunch of fixture fabricators that make good products that will serve your purpose. Other fixture fabricators can be found in the archives. Problems with these fixtures are: 1 Out-rageously expensive 2 Very lo
Electronics Forum | Mon Mar 08 10:02:11 EST 1999 | Steve Beck
Hello; I am looking for general info on backplane assemblies. Any info would be appreciated, but some of the questions that come to mind include: -What part types other than connectors do backplane cards have on them? SMT? Leaded? Quantity? Is
Electronics Forum | Fri Apr 10 05:14:01 EDT 1998 | Ben Salisbury
| | | | Has anyone had any success in repairing Fuji CP nozzles in house? Removing bent press fitted nozzle and replacing. Any input would be appreciated, please no solicitation from repair shops So far I havn't had any luck in doing this...but then
Electronics Forum | Mon Dec 03 20:12:41 EST 2001 | Kelvin Kok
Hi Peterson, We are in the business of manufacturing wave, SMT pallets and all kinds of toolings. With our 11 years expertise, we definitely able to meet your requirements with quality products. With our location in Silicon valley and supporting ma
Electronics Forum | Tue Dec 17 13:42:04 EST 2002 | robf
There are a few emerging technologies that have been growing in popularity for the past few years. Pin through paste, press fit connectors and selective soldering machines seem to be displacing custom fixtures. Most of the mixed technology boards o
Electronics Forum | Wed Dec 14 07:53:57 EST 2005 | tk380514
Aperatures are often best decided by the stencil manufacturer principally because they would know what is easiest and best for there laser cutting machines, why would i dictate to them something that would not work well for there machines. but are yo
Electronics Forum | Tue Jan 23 10:45:40 EST 2007 | saaitk
We have used 2 lubricants in the past. The first was Isopropal alcohol, this has issues with regard to H&S but can be quite effective. Most of our product at the time we encountered this problem were washed in a semi aqueous system before shipping. A