Electronics Forum | Fri Mar 11 04:12:28 EST 2016 | grahamcooper22
Please can any users of the Rheopump or Enclosed Print Head unit tell me what cartridge pressure setting they use when using lead free paste....many thanks Graham
Electronics Forum | Wed May 21 13:38:22 EDT 2008 | pjc
Solderpaste types have a big effect on print performance. Go to this link to see if the solderpaste you are using has been tested, see "Rheometric Pump Paste Tests" under MPM: http://www.speedlinetech.com/news_publications/application-notes.aspx?OnI
Electronics Forum | Fri May 23 04:25:14 EDT 2008 | muarty
One thing that has to be considered when using rheometric pumps is that the board support should match as that of the pump head being used. You can print 6" boards, but you should really still use board supports upto 16". As mentioned previously if t
Electronics Forum | Mon Apr 07 15:40:05 EDT 2008 | pjc
Pump print heads do not print better. Blades print faster and better quality than pump print heads.
Electronics Forum | Tue Jul 31 13:46:17 EDT 2001 | Hussman
How fast is your print head speed? I've found that I had to decrease my print head speed to get the paste to stick to gold pads. Not exactly sure why - but the ol' instincts worked well.
Electronics Forum | Fri Aug 18 13:38:09 EDT 2000 | James
I've heard there might be some problems when using an enclosed print head with water soluble paste. It dries out and compacts in the head. Just the opposite of what is claimed I know, but I hear it is wonderful when using no clean paste. Can anyon
Electronics Forum | Mon Oct 09 09:02:06 EDT 2017 | smtpatrick
I have used Mycronic MY500 & MY600 printers in the past. Wave goodbye to screens, it's really quick & easy to modify print programs, changes can be made and applied in 5 minutes instead of waiting 24 hours for a new screen. They print slower than a
Electronics Forum | Mon Oct 09 09:16:45 EDT 2017 | vchauhan
I have used Mycronic MY500 & MY600 printers in > the past. Wave goodbye to screens, it's > really quick & easy to modify print programs, > changes can be made and applied in 5 minutes > instead of waiting 24 hours for a new > screen. They prin
Electronics Forum | Sat Oct 07 10:10:28 EDT 2017 | tsvetan
Did you check the printing head wearing time? If I remember correct the head needs replacement after few KG of paste printing this means buy new head each few days in real production quantities. Beside for prototypes they are extremely expensive to
Electronics Forum | Tue Mar 20 18:28:26 EDT 2018 | dekhead
Print Head Stroke Calibration?
.gif)
