Electronics Forum | Mon Nov 06 10:26:55 EST 2017 | capse
I'm a Rep for Nordson March plasma system. Here is what we recommend for the ProVIA systems; O2 = 99.996%; N2 = 99.99%; Ar = 99.999%; H2 = 99.999%
Electronics Forum | Thu Oct 06 06:31:45 EDT 2022 | hta1979
Hi all ! We changed the repick setting of a part in Siplace Pro. But when we sent it to the machine, the setting did not change. My question is,it possible that this option only works with the 505 station software? This is an F5HM,we have 406 softwa
Electronics Forum | Thu Oct 27 20:32:43 EDT 2022 | oxygensmd
Hello. - Pickup offset works on with or above 505 softwares. - Offset correction works on feeders but the ProDesk won't overwrite your current SetUp / feeder cart. You have to overwrite manually or make new SetUp in Job (using optimalization),
Electronics Forum | Sun May 09 16:25:00 EDT 2004 | gabriele
Military and most commercial standards requires > post-soldered boards to measure less than 10 > �g/in of NaCl (14 when using an Omegameter, 20 > on a Ionagraph, and 37 on a Zero-Ion). > > As Dave > stated, 6.5 �g/in of NaCl is called out in >
Electronics Forum | Wed Oct 11 09:23:06 EDT 2000 | Roger Squires
Has anyone had any success in finding open circuits (i.e. ball present but not soldered to PCB) under collapsible BGA's using an Agilent HP5DX x-ray tester and the BGA2 algorithm? Can anyone recommend an elongated pad design which produces the neces
Electronics Forum | Fri Aug 14 10:26:55 EDT 1998 | Mike Konrad
5 micrograms per sq. cm. is actually not too clean. The maximum military allowed post-clean, on-board contamination is 5.7 micrograms of NaCl /cm squared (when using the Zero-Ion brand ionic contamination tester). We are use to seeing cleanliness re
Electronics Forum | Wed Oct 22 17:26:59 EDT 2003 | Terry Munson
Yes Ion Chromatography can when using a isolated extraction system called the C3 tester. Please email me or call of-line and we can show you what we have done for others to not only idendity the flux cleanliness levels but to qualify the cleaning pr
Electronics Forum | Fri May 13 02:43:21 EDT 2016 | karts22
Hi, We have several fixtures for GenRad 228x tester and would like to change sensor plates as they are quite worn. The problem is that 3 fixtures have different plate sizes for the same IC, side length is 10-12mm. What would be the best size for sens
Electronics Forum | Thu Jul 07 06:10:46 EDT 2022 | reuzzz
Update 11-08-2022: I found it! I'm searching for the technical manual with schematics of the Sefelec / Eaton SXS 506 dielectrical HV tester. Not the operating manual. I can't find it on the Sefelec / Eaton website. I've also tried to contact custome
Electronics Forum | Fri Oct 09 00:13:33 EDT 1998 | Pete Sorenson
| 2 Product reliability testing. Certainly you wouldn't shake your product to be shipped to customers, but running reliabilty tests, including shake and burn-in testing, are a good way to maintain the relaility of your product. We modified paint s