Electronics Forum | Fri Jun 25 16:32:45 EDT 1999 | MMurphy
| | | hello, | | | | | | has anyone tried dispensing solder paste in thru holes instead of waving or hand soldering. if so how did it work out for you. | | | thanks for the input | | | | | | wayne | | | | | | | | | | | We have tried this mainly
Electronics Forum | Mon Jun 28 11:47:54 EDT 1999 | Christopher Cross
| | | hello, | | | | | | has anyone tried dispensing solder paste in thru holes instead of waving or hand soldering. if so how did it work out for you. | | | thanks for the input | | | | | | wayne | | | | | | | | | | | We have tried this mainly
Electronics Forum | Fri Jun 25 03:16:38 EDT 1999 | Scott Davies
Wayne, Earl, I wish there was some way we could toss our wave solder machine forever! Unfortunately, we haven't found a way yet to do paste-in-hole reflow for large numbers of thru-hole axial and radial components, which we insert on Universal machi
Electronics Forum | Mon Mar 27 21:09:29 EST 2006 | ms
Thanks Dave I'm not convinced the air is necessarily in the paste from manufacture - suspicious that it may be folding in during the change in direction of the print cycle - or as the paste travels across apertures. It is not necessarily in the fir
Electronics Forum | Mon Mar 04 17:52:59 EST 2002 | davef
Yes, providing the surface of the via is solderable. * If so, how much paste? => Vias come in various sizes. Boards vary in thickness. So, the amount of paste to fill a via varies. Roughly, you�ll need twice as much paste as the volume of the via
Electronics Forum | Mon Feb 21 03:51:37 EST 2005 | abhirami
Solder paste thickness control is more important in SMT process. What controls do you have? I guess if everyone follows the critical control path, then there are always reduced problems. The issue is no one is perfect. Paste tends to be on the stenci
Electronics Forum | Thu Sep 04 10:24:39 EDT 2003 | paulrm
The typical PIP process is incorporated into the surface mount process. This approach requires the following: The stencil will be designed so that the correct amount of solder paste can be printed onto the through-holes to form an acceptable joint
Electronics Forum | Tue Jan 25 07:49:17 EST 2005 | davef
On "Solder beading seemed to be a problem", consider revisiting the thermal recipe used for reflow. The PTH barrel may not be getting warm enough. On "Component not being designed to pin in paste work, with no proper standoffs", consider: * Using a
Electronics Forum | Thu May 26 16:41:00 EDT 2011 | scottp
Here's what I do: - Test Surface Insulation Resistance (we're in the high reliability market and use a test significantly harder than IPC's). I also test SIR in combination with other assembly materials like conformal coatings and wave solder flux
Electronics Forum | Sat Aug 30 12:36:05 EDT 2008 | omid_juve
we are doing many experiment on this problem 1)sn63 pb37 solder paste +normal profile 2)sn62 pb36 ag2 solder paste +normal profile 3)pb free solder paste + pb free profile 4)sn63 pb37 solder paste + pb free profile but still the problem exist so i th
