Electronics Forum | Wed Apr 25 14:10:00 EDT 2018 | irc
hello, I'm learning to use the oven 1809 exl and when I try to put it on the Estop button is on all the time and allows use of the oven I read in the manual but I can not find an answer to deactivate it, could you tell me how I can disable this butto
Electronics Forum | Fri Apr 27 12:41:41 EDT 2018 | irc
Thanks for the answer, but the problem is the blue button is tur on all the time and I need turn of for work whit the oven. Best Regards.
Electronics Forum | Thu Apr 26 02:32:44 EDT 2018 | bukas
1. check both e-stop buttons are released 2. reset e-stop with blue reset button 3. open Alarms menu(there is icon) 4. acknowledge alarms(next to alarms menu icon) 5. clear alarms(next to acknowledge alarms icon) 6. go back to operating interface(thi
Electronics Forum | Tue Oct 16 11:51:26 EDT 2001 | bobm
i am using the epibond. i had alpha come in and look at our set up. they told me that the epibond can be reflowed at regular temp profiles with no problems. because i only have one oven and two pick n place machines it was important to be able to run
Electronics Forum | Wed Oct 17 10:21:08 EDT 2001 | genglish
Cheers guys for your rapid response, I investigated the problem further today, eventually I cam round to curing the adhesive in a sandwich of microscope slides resting on the PCA in question (hopefully mimicking the heat transfer), the adhesive is sp
Electronics Forum | Tue Oct 16 07:00:06 EDT 2001 | genglish
Hi all, I have a problem and would gratefully take on suggestions, firstly let me explain the situation: We are currently screen printing adhesive, using a method similar to DEKs 'Pump Print', The adhesive we are currently using is supplied from Alp
Electronics Forum | Mon May 01 12:32:50 EDT 2017 | emeto
Looks like you have bad wetting. I will do in this order as it is easier to troubleshoot starting with the machine and transitioning to the PCB: 1. First clean some bare PCBs really good and try again. 2. Check thermal profile 3. Check flux - amount
Electronics Forum | Wed Jun 29 17:56:47 EDT 2005 | Ryan
We have a new Heller 1809 EXL reflow oven and when we run MELF�s or Aluminum Electrolytic Capacitors through the oven they are being blown off the pads. I have verified that the placement is good before reflow. I verified that they are pushed down
Electronics Forum | Mon Sep 14 20:19:33 EDT 2020 | kumarb
Hi. 1) recommend to phone up Heller for assistance on this case 2) using the wakeup profile, can you confirm if the problem remains or not when you skip the warm up of zone # 2? 3) each zone is based on 2 heaters (this is what we have on our 1809e
| 1 |
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
winsouce.jpg)