Electronics Forum | Tue Jun 17 13:12:57 EDT 2003 | Jipp
We designed small PCBs (typically 2"x5")for our some of our products for quite some time now. We did not use PCB extensively and just hand-produced everything but... We now use them more and more and they got more sophisticated. we're heading for 20
Electronics Forum | Thu Nov 08 09:24:37 EST 2007 | pjc
Here's another outfit that makes a board support system: http://www.production-solutions.com/ The Gel-Flex may fit in a DEK. The gel blocks and pins in the kit are 4cm high. Not sure what the centernest depth (from conveyor belt to bottom plate) i
Electronics Forum | Wed Aug 10 04:15:01 EDT 2005 | vinitverma
Ari, I would suggest you make a checklist of all your requirements (not just large scale production) and prioritize them with weights assigned to each. Fill in the checklist for each equipment and manufacturer and you'll have the results out. I wou
Electronics Forum | Thu Jul 06 23:53:20 EDT 2017 | comortled
Hi I feel like ,I can surely help you in this matter. I too was searching for an assistance in PCB manufacturing and layout for my project work going on. I was a bit confused regarding the process,and was looking for someone for the technical suppor
Electronics Forum | Tue May 17 16:46:52 EDT 2005 | davef
Most placement machine equipment suppliers offer software for line balancing. What's with Fuji? Fujitrax is a system developed in order to attain high levels of "progress management, quality management & traceability" over several SMT lines, throug
Electronics Forum | Thu Aug 12 11:00:42 EDT 2010 | hegemon
Without seeing a picture, my first instinct would be first and foremost some fixturing that provides full support for your print process. After that, since you are citing bow and twist, consider that the fixturing might as well travel through the ov
Electronics Forum | Thu Sep 14 19:19:38 EDT 2006 | SWAG
I would try to panelize as big as you can for sure as you'll spend more time handling single boards than running anything. Additionally, this size is very close to smallest capabilities on GSM depending on your configuration. Fids on all boards in
Electronics Forum | Wed Sep 13 20:04:37 EDT 2006 | mika
Hi, We have a customer that want us to produce a single sided 0.4 x 100 x 50 mm size RoHS pcba approx 1000 of them. The board only contains three 2.54mm pitch Non P.I.P, SMT-connectors. We have never produced such a thin pcb:s before. We are thinkin
Electronics Forum | Mon Aug 27 11:11:16 EDT 2012 | rway
We have 1/2 dozens 0.031 pcbs that bow after going through the oven. We are looking for a solution to this problem to prevent bowing of the pcbs. As a result of the bowing, the pcbs, on occasion get caught in the oven, and more often have transfer
Electronics Forum | Mon Aug 27 12:51:32 EDT 2012 | cobham1
I have run 0.031 boards. One of the things you may want to look at is the speed of the oven. With 14 zones you may be going to slow with the board which could be the reason your boards are starting to bow. You might also think about adding stiffners
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2762 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835
