Electronics Forum | Wed Jun 12 10:59:27 EDT 2019 | slthomas
IOW, profiling good, here's some stuff for sale.
Electronics Forum | Fri Apr 01 03:02:59 EDT 2011 | grahamcooper22
starting point with zone settings would be, 100 / 160 / 200 / 225 / 260 deg C...but you'll have to check the exact profile on the pcb with a reflow profiler....making sure you meet the paste spec and making sure you don't heat any devices up to quic
Electronics Forum | Wed Mar 24 10:04:09 EST 2004 | Marc Apell
183C, 60 +- 15 seconds). The quesiton to use a straight ramp or soak profile comes down to the product your are soldering. The key is to get the whole assembly at the same peak temp (minimized delta) and same TAL for effective formation of the so
Electronics Forum | Tue Sep 09 12:05:44 EDT 2008 | tonyamenson
First and fore most is to find your paste manufacturer spec sheets. Read it over several times and let it all sink in. Then call them with questions as they want to keep your business so their engineers want to help you use their product. I assume y
Electronics Forum | Fri Jun 03 10:15:14 EDT 2005 | PWH
We do both our ovens once a week. If something looks out of tolerance (we've developed acceptable tolderances based on many recorded profiles over time and oven mfg. specs.) we wait a couple hours and try again. The recorded data over time is very
Electronics Forum | Wed Jan 16 14:46:38 EST 2008 | slthomas
We've got an auto fuse clip (a pair of tin/nickle spade type receptacles joined with a nylon bridge piece) giving us fits. The pins on this thing have a right angle profile (symmetrical "L" shape) and make great flux traps. No amount of tweaking pre
Electronics Forum | Thu Apr 11 11:26:34 EDT 2002 | johnw
Dave, I sand corrected since I know you wouldn't steer me wrong...although the lst time I looked at the IPC spec for a solder profiel it was still designed for older generations of paste and were specifically water wash biased although that doesn't c
Electronics Forum | Tue Aug 10 14:50:59 EDT 2004 | C Lampron
Snehal, Look at the spec sheet for the paper phenoline PCB. Look at the max temp. If it is at or lower than 183 degrees C, here lies the problem. If it will withstand higher temps at a shorter durration, you can possibly speed up the belt but like D
Electronics Forum | Fri Apr 18 11:05:47 EDT 2014 | horchak
First things first. Check the manufactures specs on the electrolytic caps as they may not be able to handle the lead free temps.
Electronics Forum | Sun Mar 30 20:21:44 EST 2003 | iman
we are using a "recommend supplier profile", and we have gotten back to the talking table with them over this profile specs. Thanks for the pointer, have ask them on this issue. Have also asked for their phase-transistion diagram to understand their
winsouce.jpg)