Electronics Forum | Thu Jun 14 13:49:04 EDT 2012 | rodrigo
Hi all, We have two Heller ovens, a 1700SX and a 1700D. The 1700SX has the profiles made so when you load them the zones turn on in sequence. First zone top and bottom are on when the profile is loaded then the next (top and bot) start to turn on as
Electronics Forum | Wed Jun 24 20:48:48 EDT 2020 | kumarb
Hi. Could we trouble you for more info on this process? We did rename the .ovw file so we have a backup. Then ran the wizard which is asking many questions we left as defaults. Then on page 6 there are the max temp for each heater. From the user manu
Electronics Forum | Wed Jun 29 17:56:47 EDT 2005 | Ryan
We have a new Heller 1809 EXL reflow oven and when we run MELF�s or Aluminum Electrolytic Capacitors through the oven they are being blown off the pads. I have verified that the placement is good before reflow. I verified that they are pushed down
Electronics Forum | Mon Sep 14 20:19:33 EDT 2020 | kumarb
Hi. 1) recommend to phone up Heller for assistance on this case 2) using the wakeup profile, can you confirm if the problem remains or not when you skip the warm up of zone # 2? 3) each zone is based on 2 heaters (this is what we have on our 1809e
Electronics Forum | Wed Jun 24 21:58:16 EDT 2020 | kumarb
Thanks Rob. They want to sell us a new TDM which does not sound correct as the entire TDM is with an offset. Logic is making us believe that the calibrated data is stored inside the onboard microwire eeprom. Do not know the format of these expected v
| 1 |
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
