Electronics Forum | Mon Nov 17 06:27:50 EST 2014 | garym4569
In the program editor on the machine, you can output a text file of the production data. You can select to output placement data, component data, and/or feeder setup for the product currently loaded on the machine. You can also do the same in the H
Electronics Forum | Thu Nov 20 06:11:16 EST 2014 | leeg
Thanks Gary, I have found that you could fix them in program editor and then use the manual assign option, the only problem then is that you cannot output a text file for the common program, the option is greyed out.
Electronics Forum | Mon Nov 17 07:15:36 EST 2014 | garym4569
If you have feeders that you want to always stay on the same machine/position, enter them in the permanent data for the machine in the MSL setup. That is a simple way to reserve locations. Also, the optimization can use any common parts set in perm
Electronics Forum | Thu Dec 12 12:44:45 EST 2013 | jaimebc
Just to add to Chad's response, there is box that you need to check in the program editor, ours is under the colum soldering unit one, click on the icon at the bottom, you should now be able to see a box " fix horizontal permanently". Check this box
Electronics Forum | Mon Nov 28 16:50:14 EST 2011 | rgduval
Edit the program in a text editor before you take it to the machine, and keep an eye on the program name (it should be right up front). I've had issues where the program name contained the path info (C:***) and this has thrown the MyData off. cheer
Electronics Forum | Sun Sep 12 20:26:34 EDT 2004 | dennispoquiz
Hi Vernon! Yeah, you're right. I tried to put a number in place of the "-" thing and it worked. Anyway, thanks for your concern. One thing that's bugging me is the generation of machine programs for a new product. Its been a tedious job for me to man
Electronics Forum | Wed Jul 09 12:00:25 EDT 2014 | bobpan
You have a rather old machine that you are running....now realizing this you need to check some things. 1. Clean the scales in the x and y direction. On some of the encoders there is an led to see if its reading correctly....Usually it turns green b
Electronics Forum | Mon Sep 06 08:49:35 EDT 2004 | Tom B.
Ensure that there is no space or extra characters at the end of the line. Use "END" key, if cursor does not stop directly behind you insert code, then that is most likely our problem. I have found that MS-Dos Editor is better suited for PPU progra
Electronics Forum | Fri Oct 16 09:48:24 EDT 1998 | Jim Lewis
Help required on vision verify on Quad 4C/Mk2. In component editor, vision verify is OK. When linked into program, the following message occurs: "Bad or missing component description" Machine locks up. Can we get around this? If so how?
Electronics Forum | Wed May 11 03:57:36 EDT 2005 | rlackey
No Shadowing issues No bugs in the software Stable platfrom Free software upgrades Inclusive full part data library Good part editor Easy of programming Ease of maintenance Bar code reader compatable Offline repair station with record of board & faul
.gif)
winsouce.jpg)