Electronics Forum | Tue Jan 22 07:34:07 EST 2002 | cabjerk
Hi All; We are having problems finding software for off line programming of our GPD machine. We have talked to GPD and no luck. Any leads out there? Thanks Carl B.
Electronics Forum | Fri Feb 08 14:46:25 EST 2002 | dod
Unicam has an interface that will program the dispense machine from GPD and the ouput has been validated by GPD.
Electronics Forum | Thu Feb 28 13:59:54 EST 2002 | Jeff
CircuitCAM is a Partner with GPD and worked along with GPD to create the interface to support their dispensers.
Electronics Forum | Mon Jan 28 12:09:27 EST 2002 | billschreiber
Hello Carl, Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com Click on the AOI/StencilScan and GlueScan link. If you hav
Electronics Forum | Tue Jan 22 20:30:44 EST 2002 | davef
Start with the following: * Aegis ISC (Circuit CAM) * Mitron (GenRad) (CIMBridge) * CAE Technologies (C-Link)
Electronics Forum | Mon Jan 28 17:34:32 EST 2002 | PeteC
The product mentioned by SmartSonic (stencil cleaner maker) is from ScanCAD International. See http://www.scancad.com
Electronics Forum | Fri Jun 03 15:30:06 EDT 2005 | nealh
We are currently using CirciutCAM for our documentation and run a Fuji line with a CP643 and an IP2. We are using FujiCam to program. I wouldlike to replace the IP2 with a Mydata My9 and here are my questions. Who out there is using CIrcuitCAM to pr
Electronics Forum | Fri Jun 03 15:38:59 EDT 2005 | mmjm_1099
Heres some information on Circuitcam. But as for a mixed line I can't help you out there. http://www.smtnet.com/forums/index.cfm
Electronics Forum | Tue Nov 23 11:32:58 EST 2010 | kevslatvin
We have a Saki bench top machine. Not sure if I would be much help as I haven't done much programing on it for about a year now. I handed it off to someone else and only get involved if there is a problem.
