Electronics Forum | Thu Sep 17 10:18:54 EDT 2015 | huske
What model do you have? Are you working with a Midas only or Hydra as well? Are you looking for basic information on how to get started with chips and SO's? Or like how to use auto-teach or manually measuring parts and programming or more like select
Electronics Forum | Wed Mar 25 16:36:07 EDT 2009 | peaksamsung
Hello, I am currently running a Samsung CP-60 and CP-45 SMT machines and I am looking for software for offline programing. I need software that will import cad and Bom data as well as a having it's own part library. Any suggestions would be greatly a
Electronics Forum | Mon Jan 23 05:43:43 EST 2006 | aj
what programming software are you using. I switched to flexa and I got a file of part datas from the engineer, if you like I can forward them to you. aj
Electronics Forum | Wed May 06 18:15:03 EDT 2020 | travishemen
I thought i posted this last night. The easiest way I can think of to see what nozzle is being used is to put the machine in step mode and do one part at a time. Also the levelness of the table and Z0 could be suspect. On a CP643 this can get out
Electronics Forum | Wed Jul 02 14:25:14 EDT 2003 | Earl Wildes
Greetings. Does anyone know of a good reference on the proper physical handling of surface mount devices? We have a number of very small builds, so our stockroom is very often issuing single piece quantities. The parts are protected from ESD, but
Electronics Forum | Tue May 19 12:09:08 EDT 2020 | greezmky
Thank you all that contributed to the troubleshooting! I measured the height of 10+ parts with calipers and found the average to be around 2.15mm. In the program height was set to 2.42mm. I reduced the height to 2.15mm. I have since ran 561 boards
Electronics Forum | Thu May 07 16:10:37 EDT 2020 | greezmky
Being new to the industry, the question is how much squish should I see once the part is pushed into the paste? Is there a recommended offset to create the perfect impression in the paste? I did notice yesterday that the height called out in the pro
Electronics Forum | Mon Dec 15 22:05:02 EST 2003 | Sam
hi Liang, We had the same problem like you before, it happened during starts up the machine (S13) and run the production for the first or second board. We also replaced the 2/2-way microvalve of placement circuit. The problem had solved at the begini
Electronics Forum | Tue May 05 06:50:14 EDT 2020 | greezmky
I am having an issue with our CP-642. It will place fine a great deal of the time however when there is a feeder issue or if the cycle changes, after a part is replenished, it will suddenly miss RS1A diodes on the boards for about five to ten boards
Electronics Forum | Wed Nov 16 14:44:31 EST 2011 | olddog
Bobpan, thank you for your speedy response. As to the items you noted: 1. I did a test of Funct 30 for the first 5 nozzles, 2 times each as follows: noz1 Ht=215 & 219, center=1005 (all nozzles all tests), run out 2.2 & 2.7. Noz2 Ht=228 &228, runout=
