Electronics Forum | Wed Aug 03 07:29:03 EDT 2022 | pradeep14
Hi, We are facing the issue with Component orientation(Wrong orientation), during Proto build/NPI time in SMT for 1st board placement. We are not doing 1st board with STICKY board, directly placing the components with Paste board only. Pls suggest, H
Electronics Forum | Wed Aug 03 14:09:57 EDT 2022 | emeto
1. Add controls in programming and setup creation for polarity 2. Check polarities in actual setup before you run. They should match the paper.
Electronics Forum | Wed Aug 03 13:06:51 EDT 2022 | proceng1
I am a little lost on some of that, but here is what we do. The camera view has the package outline, including an orientation indicator. The operator has the camera step through the program, and checks that the outline and indicator are correct on
Electronics Forum | Thu Aug 04 16:08:11 EDT 2022 | unisoft
>>>> The Unisoft ProntoPLACE software ( https://www.unisoft-cim.com/pcbplace.php ) creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic feat
Electronics Forum | Wed Aug 03 20:35:52 EDT 2022 | stephendo
Over simplified generic method. Step 1: make a document with every part shape showing zero orientation. Specify CW or CCW. Step 2: Find every step in the process that does not follow the standardisation and adjust as needed. The best I saw this wor
Electronics Forum | Sat Jun 28 18:43:35 EDT 2008 | john_smith
Wouldn't it be nice if all components and packaging were standardized. Some ignaramous that has never done any production work is designing the component and has not a clue what it is like in the real world of manufacturing. Is there an answer to the
Electronics Forum | Wed Aug 03 16:02:42 EDT 2022 | spoiltforchoice
This repeats a very similar thread recently. The obvious answers are given already. However there are extra/different steps that can be taken depending on where your data has come from. If you are an OEM and you are building using data that was gener
Electronics Forum | Fri Jan 16 07:48:29 EST 2004 | Mika
We usually program the components in the component database with pin 1 in the lower left corner. Then in the feeder database we set the component orientaion to 270 deg for Tray feeders(turn the tray in the feeder 180 deg) and "tube" feeders. For tape
Electronics Forum | Thu Jan 13 10:30:40 EST 2011 | bdamico
Hello Scott, Simply program the side angle cameras as you would for any other device using the downward camera. For instance, solder joint inspection for a PLCC would utilize a basis window, bridge inspection algorithm and individual solder joint i
Electronics Forum | Thu Mar 01 05:53:33 EST 2001 | jmlasserre
Are there some standards (Jedec ??) for the components orientation into the reels (memory or logic) and which ones ? Thanks
winsouce.jpg)